What engine does a Pontiac Fiero have?
| Pontiac Fiero | |
|---|---|
| Engine | 2.5 L (151 cu in) LR8 I4 2.8 L (173 cu in) L44 V6 |
| Transmission | 3-speed THM-125 automatic 4-speed Muncie manual 5-speed Getrag 282 manual 5-speed Isuzu manual |
| Dimensions | |
| Wheelbase | 2,373 mm (93.4 in) |
How fast is a V6 Pontiac Fiero?
Specifications
| Model | Pontiac Fiero | Pontiac Fiero GT |
|---|---|---|
| Power | 92 hp | 140 hp |
| Torque | 134 lbft | 170 lbft |
| Weight | 1170 kg | 1265 kg |
| Top speed | 103 mph* | 125 mph* |
How much horsepower did a Pontiac Fiero have?
| Pontiac Fiero GT Engine Technical Data | |
|---|---|
| Compression Ratio : | 8.50 |
| Maximum power – Output – Horsepower : | 142 PS or 140 bhp or 104 kW @ 5200 rpm |
| Maximum torque : | 230.0 Nm or 169 lb.ft @ 5200 rpm |
| Drive wheels – Traction – Drivetrain : | RWD |
What engine is in a 1987 Pontiac Fiero?
Although the base engine was GM’s Iron Duke 2.5-liter four-cylinder, the Fiero GT used a more powerful fuel-injected 2.8-liter V-6 rated at 140-horsepower – that might not seem like a lot, but this car was smaller and lighter than the 240-horsepower Corvette from 1987.
Why did Fieros catch fire?
According to the complaints, driving the Fieros with low oil levels can cause a connecting rod to break. Oil escaping from the resulting hole ″would catch on fire when it contacted the exhaust manifold or hot exhaust components,″ the agency’s engineers said in summarizing the alleged defect.
Did Fieros catch on fire?
The Pontiac Fiero Used To Catch On Fire According to an article from the Los Angeles Times about the investigation of the Pontiac Fiero engine fires, the fires were caused by oil leaking into the engine and combusting as the engine heated up.
What kind of engine does a 1988 Pontiac Fiero have?
1988 Pontiac Fiero finished in Silver paint. This Car has 45,357 original miles with a clean Carfax and local to our area! This is an adult-driven, and owned Fiero. Powered by the 2.5L Iron Duke th…
When was the last year the Pontiac Fiero was made?
The Pontiac Fiero is a mid-engined sports car that was built by General Motors from 1983 to 1988 for the 1984 to 1988 model years.
What kind of engine do you need for a Fiero?
This engine is a very logical replacement for the factory Fiero engine. It will bolt directly to the 4-speed and 5-speed transmissions. The 3.4 Liter 60 degree pushrod engine is one of the most logical choices for replacing the old, worn out, 2.8 Fiero engine. This engine is available as a like-new, factory rebuild or factory crate engine.
Can a 3800 t465 be converted to a Fiero?
This is one of the easier engine conversions, as there are many pre-made components that allow the installation of this supercharged engine into the Fiero. This engine will bolt directly into your Fiero with the 3800 T465 or your manual transmission.