Is Corsair H80i v2 good?
The H80i v2 is one of the latest in a line of very popular and extensively proven AIO coolers from Corsair. It’s tuned to be well suited to high-end systems, with a powerful pump, thick cooling pipes, a thick radiator and two high-performance 120mm fans, likely more than enough for a heavily overclocked CPU.
What is H80i v2 driver?
The Corsair H80i v2 driver runs on your operating system and enables it to communicate with the CPU cooler you use. If the driver hasn’t been properly installed on your computer, your Corsair cooler won’t fully function.
What is H80i v2?
The Hydro Series H80i v2 is a high performance, all-in-one liquid CPU cooler that works with standard 120mm radiator mounts. The extra-thick 49mm x 120mm radiator and dual SP120L PWM fans provide the excellent heat dissipation you need for high performance CPUs.
How long does a Corsair H80i last?
They will last 3 years no problem – but I strongly suggest you become familiar with the hardware, because the dust buildup on the radiator will be quite severe.
Does H80i have RGB?
The Hydro Series H80i v2 is a high performance, all-in-one liquid CPU cooler that works with standard 120mm radiator mounts. It’s Corsair Link compatible, so you can customize cooling performance, monitor system temperature, and change the color of the RGB LED lighting.
What’s the difference between Corsair Link and ICUE?
What’s the difference between LINK and ICUE? ICUE is the current software interface for the Corsair ecosystem, LINK was the old interface and no longer being developed. If you have an old Corsair product not supported by ICUE; by all means, use LINK to control it.
How thick is an AIO?
All AIOs seem to be bound to 25mm thick radiators. The only exception that I’ve found was the H105 from corsair which has a 37mm thick radiator but it’s a 240mm solution so it wont fit onto my existing 140mm case fans.
Where does Corsair Link cable connect?
Mount the Corsair Link Commander in any empty 3.5 drive bay using the provided screws. Then, connect the attached cable to any available USB 2.0 header on your PC’s motherboard. Take care when connecting the USB cable, as it is keyed to prevent incorrect installation.
Does Corsair H100i work with Ryzen?
If you have the original h100i it will fit the am4 socket, however if you have a newer model, ie the v2, you may need an am4 kit. The old model of h100i with the square all black water block fits without new parts, jist gotta use the amd brackets that shipped with it.
Will Corsair H100i fit AM4?
Most new Corsair liquid coolers are compatible with AMD’s AM4 socket out-of-the-box. You do not need to use the AM4 AMD Retention Bracket Kit if you have one of the following coolers: iCUE H100i Elite Capellix.
Do you need Corsair link for h80i GT?
While the H80i GT can operate without the Corsair Link software, it’s needed to get the most out of your new cooler. The Corsair Link software allows you to change the color of the pump cap backlight, adjust the pump speed, and program your own fan curves. Connect the mini-USB side of the included data cable to the waterblock.
Is the Corsair hydro h80i a good water cooler?
“Corsair Hydro H80i is a really nice end water cooling package. The model adds a number of improvements over its predecessor, including an improved water block and more lavish fans. Moreover, the model has support from the board for Corsair Link superb control software that completely blows away competing solutions.” (Google Translation)
Why is the hydro series h80i so good?
Hydro Series H80i comes pre-filled, and never needs refilling or priming. The modular design makes installation simpler, and it’s compatible with Intel and AMD processors. Minimal coolant evaporation helps ensure long life, and the resilient material offers both high flexibility and excellent leak protection.
What can you do with Corsair waterblock software?
The Corsair Link software allows you to change the color of the pump cap backlight, adjust the pump speed, and program your own fan curves. Connect the mini-USB side of the included data cable to the waterblock. Connect the USB header side to a free 9-pin USB 2.0 header on your motherboard.