How many stops do I need for ND filter?

For long exposure shots like below with clear water and blurred clouds you will want a 6 stop or 10 stop ND filter as this will give you an exposure time of at least 30 seconds and up to 4 minutes. The higher stop filters will enable you to get those long exposures.

Is 10 stop ND filter too much?

At times of the day when there is less light that is available to your camera , a 10 stop ND filter will force your camera shutter to need to stay open for much longer. it is not unusual to have exposure times in the range of 0.25 – 30 secs without the use of any ND filters during a sunrise or sunset.

What does an ND 8 filter do?

An ND2 filter halves the light, while an ND8 filter reduces it to one eighth. 1 stop, 2 stops, 3 stops, etc. Sometimes these are referred to as EV, for exposure value. These are probably the most convenient measurement because they tell you how many stops they’ll adjust your exposure by.

Is 8 stop ND filter enough?

Recommended ND Filter Factors Many landscape photographers recommend that you head out into the field with a 6-stop ND filter that should be perfect for slowing your shutter speeds enough to show smooth motion in mountain streams and waterfalls. Add your polarizer to make it an 8-stop ND stack. Clouds passing overhead.

Can you use a 10-stop ND filter at sunset?

ND filters are very common but they are typically only 3-stops in strength (reducing the amount of light by 8 times) so a 10-stop one is quite extreme. As it was nearly sunset, I also needed to use a graduated neutral density (GND) filter to balance the exposure between the sky and foreground.

Are ND filters good for portraits?

Portraits can be beautifully enhanced by ND Filters for all the same reasons they make landscapes so interesting. You can play around with depth of field in bright conditions, and use motion blur to powerful effect.