What does the Tornador gun do?

What does the Tornador gun do?

The TORNADOR® Air Gun removes debris from its hiding spots inside the car and aids you in drying the exterior and engine area. The powerful blast of air cleans and dries where you can’t, to complete your detailing job faster.

How do you use a Tornador foam cleaning gun?

To use the TORNADOR® Foam Gun for car washing, start by rinsing down the vehicle with a water hose. Mix the desired shampoo with water as directed on the product’s label. Attach the nozzle to the jar tightly and attach the gun to the air compressor. Turn the air compressor i and coat the vehicle with foam.

What do you put in a Tornador?

For Best Results: Pour two ounces of Interior Super Soap in your Tornador tank and fill the rest of the tank with water. Spray down your desired surfaces, wiping the excess with a Microfiber Towel when finished. The Tornador also has an air gun that can be used to dry cracks and crevices where water is trapped.

What size air compressor do you need for a Tornador?

The Z-020 Tornador Black produces enormous power with a very small air compressor. All you need is a compressor with a discharge rate of at least 270 l per minute (4.5 cfm). This can be achieved using compressors with a reservoir of as little as 13 gallon capacity.

Do you need air compressor for detailing?

Air compressors are a must for the auto detailers. Use these auto detailing air compressor accessories tool to save time by purging out dirt and debris from under seats, cracks and crevices or use with your Tornador Car Tool.

What size air compressor do I need for a Tornador?

All you need is a compressor with a discharge rate of at least 270 l per minute (4.5 cfm). This can be achieved using compressors with a reservoir of as little as 13 gallon capacity. Mobile detailers can now use the Tornador Black with a smaller, portable air compressor.

How much air does a Tornador need?

The TORNADOR® Black cleaning tool requires a constant air pressure between 5.5 and 6.3 bar 78 to 90 psi, for optimum performance. DO NOT EXCEED 90 psi.

How do you make homemade car interior cleaner?

Mix together equal parts of white vinegar and water, then spray it onto any vinyl, plastic or wood surfaces in your car that need cleaning. Allow it to soak in and wipe it dry with a clean rag.