How much is a John Deere sst16 worth?
John Deere SST16
| Production | |
|---|---|
| Manufacturer | John Deere |
| Type | Zero-turn mower |
| Factory | Horicon, Wisconsin, USA |
| Original price | $4,299 (2001 ) |
Are John Deere mowing decks interchangeable?
Lawnmower decks are largely interchangeable. Engines will swap without issue, however, blades and drive systems may differ.
What size is my John Deere mower deck?
Lie down on the ground next to the elevated mower, and pass the tape measure beneath the blades, hooking it on the opposite side of the deck. Note the distance on the tape measure. This is your deck size.
What year was the John Deere SST16 made?
The John Deere SST16 is a 2WD lawn tractor from the SST series. This tractor was manufactured by John Deere in Horicon, Wisconsin, USA from 2000 to 2003.
Are John Deere spindles interchangeable?
If they are the same the entire units will interchange.
How do I know which John Deere mower deck I have?
The model serial number of a John Deere lawn mower is printed on an identification tag located on the left side of the deck (standing behind the mower). The serial number (PIN) is 13 or 17 digits long.
How wide is a 42 inch mower deck?
If your lawn is 1/2 to 2 acres, a ride-on mower with a 42 to 48 inch cutting deck will do. If the lawn is 3 acres or more, the patio should be at least 50 inches wide.
How do I know what John Deere mower deck I have?
Do all lawn mower engines have the same bolt pattern?
If you do not know the horsepower exactly, that’s OK since most engines within a power range have a similar pattern for the bolts that mount the engine. For example, most 3 to 5 HP engines have the same bolt pattern. This is rarely a problem unless you are moving up to a larger engine for more power.
How do you know if your spindles are bad?
You can tell if a mower deck spindle is bad by noticing uneven cuts, squealing, and vibration. Having bent or broken parts is another way to know if the spindle is going out. As soon as you notice these signs, it is critical to discontinue use and change the spindle immediately.