What are the things to configure in EIGRP routing?
To configure EIGRP in the Cisco IOS, just follow these steps:
- Set the bandwidth on your interfaces using the bandwidth command.
- Start the EIGRP routing process and specify your AS number.
- Once you are through this stage, next step is to instruct the router in order to advertise the networks that are directly linked to it.
What is the command to configure EIGRP?
The first command, router eigrp ASN_NUMBER, enables EIGRP on a router. ASN_NUMBER represents an autonomous system number and has to be the same on all routers running EIGRP, otherwise routers won’t become neighbors.
How do I find my EIGRP configuration?
Issue the show ip route eigrp command to verify. Issue the show ip eigrp topology command to verify. If routes are not seen in the topology table, issue the clear ip eigrp topology command. Issue the show ip eigrp topology net mask command, to find the Router ID (RID).
What is router EIGRP command?
Enhanced Interior Gateway Routing Protocol (EIGRP) is a dynamic routing network layer Protocol which works on the protocol number 88. EIGRP supports classless routing, VLSM, route summarization, load balacing and many other useful features. EIGRP exchange messages for communication between the routers operating EIGRP.
What is Igrp in networking?
Interior Gateway Routing Protocol (IGRP) is a distance vector interior gateway protocol (IGP) developed by Cisco. It is used by routers to exchange routing data within an autonomous system. IGRP is a proprietary protocol.
What command displays EIGRP routes?
Verifying EIGRP
| Router#show ip eigrp neighbors | Displays the neighbor table. |
|---|---|
| Router#show ip eigrp traffic | Shows the number and type of packets sent and received. |
| Router#show ip route | Shows the complete routing table. |
| Router#show ip route eigrp | Shows a routing table with only EIGRP entries. |
What is IGRP Eigrp?
IGRP is an interior gateway protocol (IGP) which is a distance-vector routing protocol used within an autonomous system (AS). EIGRP is an advanced distance-vector routing protocol that relies on features commonly associated with link-state protocols.
How to configure EIGRP on a router?
Configuring EIGRP 1. EIGRP configuration closely resembles RIP configuration. Only two steps are required: enabling EIGRP by using the router eigrp ASN_NUMBER command; telling EIGRP which networks to advertise by using one or more network statements; The first command, router eigrp ASN_NUMBER, enables EIGRP on a router.
Which is the second command in EIGRP configuration study?
The second command, network SUBNET, enables EIGRP on selected interfaces and specifies which networks will be advertised. By default, the network command takes a classful network number as the parameter.
How to set default metrics in EIGRP configuration?
default-metric (EIGRP) To set metrics for an Enhanced Interior Gateway Routing Protocol (EIGRP), use the defaultmetric command in the appropriate configuration mode. To remove the metric values and restore the default state, use the no form of this command. default-metric bandwidth delay reliability loading mtu
How to configure EIGRP stub routing in iOS?
Configuring the EIGRP Stub Routing Named Configuration 1 Enables privileged EXEC mode. Enter your password if prompted. 2 Enters global configuration mode. 3 Enables an EIGRP routing process and enters router configuration mode. 4 Enters address family configuration mode to configure an EIGRP IPv4 or IPv6 routing instance.