How do you mount a Cooler Master Hyper 212?

By Trendy

How do you mount a Cooler Master Hyper 212?

Hyper 212 Series – AMD Installation

  1. Remove the OEM mounting bracket from the motherboard.
  2. Place the back plate on board as shown Below.
  3. Place the standoffs through the board from the top and secure them with a nut as shown below.
  4. Attach the cooler to the CPU Socket.
  5. Connect the Fan.
  6. Connect Fan to the motherboard CPU Fan.

Is the Cooler Master Hyper 212 compatible with LGA 1151?

Wide-range PWM fan with unique wave-shaped blade design for excellent airflow. Versatile all-in-one mounting solution supporting the latest Intel® LGA 1366 / 1155 / 1151 / 1150 and AMD FM2 / FM1 / AM3+.

Does a Cooler Master Hyper 212 EVO fit?

It will be a close fit, but should fit just fine. Just keep in mind that often with the 212 Evo its high profile RAM that is the problem, as the heat sink is very wide and quite low.

Is the Cooler Master Hyper 212 EVO good?

Our Verdict. Priced around $40 at release, the Hyper 212 Evo v2 is a fantastic frugal option with a surprising amount of cooling potential, and makes a great choice for first time system builders or budget PCs.

Is Cooler Master Hyper 212 LED good?

The Hyper 212 LED is basically a Hyper 212 Evo, our pick as the best budget cooler, but with red LEDs on the cooling fan. This is an excellent air cooler that is relatively easy to install, does a good job keeping temperatures in check, and is quiet to boot.

Is the Cooler Master Hyper 212 EVO quiet?

In the end, we found the Hyper 212 quiet compared to many other coolers, but it is certainly not silent. However, most users will be fine with the low noise levels of the Hyper 212 fan as mounted on the heatsink.

Is Cooler Master Hyper 212 led good?

How do you install Cooler Master hyper 212?

1. Secure Back plate to the motherboard 2. Place the back plate on board as shown Below. ( Make sure that the covered feet of bracket are touching the bottom of the board .) 3. Place the standoffs through the board from the top and secure them with a nut as shown below.

How does the hyper 212 Evo cooling system work?

Hyper 212 EVO Well-balanced cooling performance provides fin optimizations with perfect balance between high and low speed operations. 4 Direct Contact heat pipes with the patented CDC™ (Continuous Direct Contact) technology – creating a perfect, sleek surface for heat conduction.

How to install the hyper 212 series Intel?

Hyper 212 Series – Intel Installation 1 Press down on screw to slide the pin to each hole. 2 Adjust the slide pin to the correct socket More

How do you mount a hyper 212 to a motherboard?

1. Remove the OEM mounting bracket from the motherboard. 2. Place the back plate on board as shown Below. ( Make sure that the covered feet of bracket are touching the bottom of the board .) 3. Place the standoffs through the board from the top and secure them with a nut as shown below.