How do you cut a laminate sheet with a jigsaw?
Use the starter holes to start the interior cut. Insert the jigsaw blade inside the hole, aligning the blade with the cutting line while keeping the show flat against the laminate countertop. Turn on the jigsaw and let the blade get up to speed, then steadily move the blade against the material.
Can I use a jigsaw to cut laminate countertop?
Plastic laminate is surprisingly easy to cut. You can do it with a circular saw, a jigsaw, a router or even some hand tools. Cutting a sheet laminate by itself is best done with tin snips or aviation snips, provided you’re cutting it oversize and will trim it later.
What’s the best way to cut Formica countertop?
To cut through laminate countertops, you can use a hand saw, but a circular saw makes the job much quicker. Because a circular saw can produce jagged edges and chip the laminate, your best bet is to lay the laminate face-side down and cut from the back to the front.
How do you cut a laminate sheet?
One standard way to cut a laminate sheet is to score it with a utility knife or a linoleum knife and snap it off, somewhat like cutting glass. This works fine for straight cuts that are relatively short. You can also make very short cuts, such as when cutting strips to length, with a miter saw.
Which saw blade for laminate countertops?
The best circular saw blade for cutting through laminate for a kitchen counter is one with many fine teeth — at least 40. Blades with carbide tips tend to last longer than regular steel. In addition, you should choose a narrow blade, or one with thin kerf,…
How do you cut Formica sheets?
Steps: The first step in cutting a formica sheet is to mark out or sketch the required pattern. Once the sketch is prepared, cutting should be done with a saber saw equipped with fine blades. Cutting has to be done in excess of 3/8 to 1/2 inches outside the sketch border. After cutting the sheets, adhesive should be applied at the back.
What is kitchen counter laminate?
Often referred to as Formica, a popular countertop brand, laminate kitchen counters come in sheets that are cut to fit your counters. While laminate counters will have seams, a good fabricator should have the ability to make them practically disappear into the surface.