Main Content

This example shows how to display and interpret linear regression output statistics.

Load the `carsmall`

data set, a matrix input data set.

```
load carsmall
X = [Weight,Horsepower,Acceleration];
```

Fit a linear regression model by using `fitlm`

.

lm = fitlm(X,MPG)

lm = Linear regression model: y ~ 1 + x1 + x2 + x3 Estimated Coefficients: Estimate SE tStat pValue __________ _________ _________ __________ (Intercept) 47.977 3.8785 12.37 4.8957e-21 x1 -0.0065416 0.0011274 -5.8023 9.8742e-08 x2 -0.042943 0.024313 -1.7663 0.08078 x3 -0.011583 0.19333 -0.059913 0.95236 Number of observations: 93, Error degrees of freedom: 89 Root Mean Squared Error: 4.09 R-squared: 0.752, Adjusted R-Squared: 0.744 F-statistic vs. constant model: 90, p-value = 7.38e-27

The model display includes the model formula, estimated coefficients, and model summary statistics.

The model formula in the display, `y ~ 1 + x1 + x2 + x3`

, corresponds to $\mathit{y}={\beta}_{0}+{\beta}_{1}{\mathit{X}}_{1}+{\beta}_{2}{\mathit{X}}_{2}+{\beta}_{3}{\mathit{X}}_{3}+\u03f5$.

The model display shows the estimated coefficient information, which is stored in the `Coefficients`

property. Display the `Coefficients`

property.

lm.Coefficients

`ans=`*4×4 table*
Estimate SE tStat pValue
__________ _________ _________ __________
(Intercept) 47.977 3.8785 12.37 4.8957e-21
x1 -0.0065416 0.0011274 -5.8023 9.8742e-08
x2 -0.042943 0.024313 -1.7663 0.08078
x3 -0.011583 0.19333 -0.059913 0.95236

The `Coefficient`

property includes these columns:

`Estimate`

— Coefficient estimates for each corresponding term in the model. For example, the estimate for the constant term (`intercept`

) is 47.977.`SE`

— Standard error of the coefficients.`tStat`

—*t*-statistic for each coefficient to test the null hypothesis that the corresponding coefficient is zero against the alternative that it is different from zero, given the other predictors in the model. Note that`tStat = Estimate/SE`

. For example, the*t*-statistic for the intercept is 47.977/3.8785 = 12.37.`pValue`

—*p*-value for the*t*-statistic of the hypothesis test that the corresponding coefficient is equal to zero or not. For example, the*p*-value of the*t*-statistic for`x2`

is greater than 0.05, so this term is not significant at the 5% significance level given the other terms in the model.

The summary statistics of the model are:

`Number of observations`

— Number of rows without any`NaN`

values. For example,`Number of observations`

is 93 because the`MPG`

data vector has six`NaN`

values and the`Horsepower`

data vector has one`NaN`

value for a different observation, where the number of rows in`X`

and`MPG`

is 100.`Error degrees of freedom`

—*n*–*p*, where*n*is the number of observations, and*p*is the number of coefficients in the model, including the intercept. For example, the model has four predictors, so the`Error degrees of freedom`

is 93 – 4 = 89.`Root mean squared error`

— Square root of the mean squared error, which estimates the standard deviation of the error distribution.`R-squared`

and`Adjusted R-squared`

— Coefficient of determination and adjusted coefficient of determination, respectively. For example, the`R-squared`

value suggests that the model explains approximately 75% of the variability in the response variable`MPG`

.`F-statistic vs. constant model`

— Test statistic for the*F*-test on the regression model, which tests whether the model fits significantly better than a degenerate model consisting of only a constant term.`p-value`

—*p*-value for the*F*-test on the model. For example, the model is significant with a*p*-value of 7.3816e-27.

Perform analysis of variance (ANOVA) for the model.

`anova(lm,'summary')`

`ans=`*3×5 table*
SumSq DF MeanSq F pValue
______ __ ______ ______ __________
Total 6004.8 92 65.269
Model 4516 3 1505.3 89.987 7.3816e-27
Residual 1488.8 89 16.728

This `anova`

display shows the following.

`SumSq`

— Sum of squares for the regression model,`Model`

, the error term,`Residual`

, and the total,`Total`

.`DF`

— Degrees of freedom for each term. Degrees of freedom is $$n-1$$ for the total, $$p-1$$ for the model, and $$n-p$$ for the error term, where $$n$$ is the number of observations, and $$p$$ is the number of coefficients in the model, including the intercept. For example,`MPG`

data vector has six`NaN`

values and one of the data vectors,`Horsepower`

, has one`NaN`

value for a different observation, so the total degrees of freedom is 93 – 1 = 92. There are four coefficients in the model, so the model`DF`

is 4 – 1 = 3, and the`DF`

for error term is 93 – 4 = 89.`MeanSq`

— Mean squared error for each term. Note that`MeanSq = SumSq/DF`

. For example, the mean squared error for the error term is 1488.8/89 = 16.728. The square root of this value is the`root mean squared error`

in the linear regression display, or 4.09.`F`

—*F*-statistic value, which is the same as`F-statistic vs. constant model`

in the linear regression display. In this example, it is 89.987, and in the linear regression display this*F*-statistic value is rounded up to 90.`pValue`

—*p*-value for the*F*-test on the model. In this example, it is 7.3816e-27.

If there are higher-order terms in the regression model, `anova`

partitions the model `SumSq`

into the part explained by the higher-order terms and the rest. The corresponding *F*-statistics are for testing the significance of the linear terms and higher-order terms as separate groups.

If the data includes replicates, or multiple measurements at the same predictor values, then the `anova`

partitions the error `SumSq`

into the part for the replicates and the rest. The corresponding *F*-statistic is for testing the lack-of-fit by comparing the model residuals with the model-free variance estimate computed on the replicates.

Decompose ANOVA table for model terms.

anova(lm)

`ans=`*4×5 table*
SumSq DF MeanSq F pValue
________ __ ________ _________ __________
x1 563.18 1 563.18 33.667 9.8742e-08
x2 52.187 1 52.187 3.1197 0.08078
x3 0.060046 1 0.060046 0.0035895 0.95236
Error 1488.8 89 16.728

This `anova`

display shows the following:

First column — Terms included in the model.

`SumSq`

— Sum of squared error for each term except for the constant.`DF`

— Degrees of freedom. In this example,`DF`

is 1 for each term in the model and $$n-p$$ for the error term, where $$n$$ is the number of observations, and $$p$$ is the number of coefficients in the model, including the intercept. For example, the`DF`

for the error term in this model is 93 – 4 = 89. If any of the variables in the model is a categorical variable, the`DF`

for that variable is the number of indicator variables created for its categories (number of categories – 1).`MeanSq`

— Mean squared error for each term. Note that`MeanSq = SumSq/DF`

. For example, the mean squared error for the error term is 1488.8/89 = 16.728.`F`

—*F*-values for each coefficient. The*F*-value is the ratio of the mean squared of each term and mean squared error, that is,`F = MeanSq(xi)/MeanSq(Error)`

. Each*F*-statistic has an*F*distribution, with the numerator degrees of freedom,`DF`

value for the corresponding term, and the denominator degrees of freedom, $$n-p$$. $$n$$ is the number of observations, and $$p$$ is the number of coefficients in the model. In this example, each*F*-statistic has an $${F}_{(1,89)}$$ distribution.`pValue`

—*p*-value for each hypothesis test on the coefficient of the corresponding term in the linear model. For example, the*p*-value for the*F*-statistic coefficient of`x2`

is 0.08078, and is not significant at the 5% significance level given the other terms in the model.

Display coefficient confidence intervals.

coefCI(lm)

`ans = `*4×2*
40.2702 55.6833
-0.0088 -0.0043
-0.0913 0.0054
-0.3957 0.3726

The values in each row are the lower and upper confidence limits, respectively, for the default 95% confidence intervals for the coefficients. For example, the first row shows the lower and upper limits, 40.2702 and 55.6833, for the intercept, $${\beta}_{0}$$. Likewise, the second row shows the limits for $${\beta}_{1}$$ and so on. Confidence intervals provide a measure of precision for linear regression coefficient estimates. A $$100(1-\alpha )\%$$ confidence interval gives the range the corresponding regression coefficient will be in with $$100(1-\alpha )\%$$ confidence.

You can also change the confidence level. Find the 99% confidence intervals for the coefficients.

coefCI(lm,0.01)

`ans = `*4×2*
37.7677 58.1858
-0.0095 -0.0036
-0.1069 0.0211
-0.5205 0.4973

Test the null hypothesis that all predictor variable coefficients are equal to zero versus the alternate hypothesis that at least one of them is different from zero.

[p,F,d] = coefTest(lm)

p = 7.3816e-27

F = 89.9874

d = 3

Here, `coefTest`

performs an *F*-test for the hypothesis that all regression coefficients (except for the intercept) are zero versus at least one differs from zero, which essentially is the hypothesis on the model. It returns $$p$$, the *p*-value, `F`

, the *F*-statistic, and `d`

, the numerator degrees of freedom. The *F*-statistic and *p*-value are the same as the ones in the linear regression display and `anova`

for the model. The degrees of freedom is 4 – 1 = 3 because there are four predictors (including the intercept) in the model.

Now, perform a hypothesis test on the coefficients of the first and second predictor variables.

H = [0 1 0 0; 0 0 1 0]; [p,F,d] = coefTest(lm,H)

p = 5.1702e-23

F = 96.4873

d = 2

The numerator degrees of freedom is the number of coefficients tested, which is 2 in this example. The results indicate that at least one of $${\beta}_{2}$$ and $${\beta}_{3}$$ differs from zero.

`LinearModel`

| `fitlm`

| `stepwiselm`

| `anova`

- Examine Quality and Adjust Fitted Model
- Linear Regression
- Stepwise Regression
- Linear Regression Workflow
- Train Linear Regression Model
- What Is a Linear Regression Model?