How do you remove old Accuride drawer slides?

How do you remove old Accuride drawer slides?

The friction method is simple. To separate the drawer from the cabinet, all you have to do is pull the drawer far enough and the slides will disconnect. There will be some resistance from the ball retainers at the end, but that is by design. (Otherwise, the drawer would just fall out.)

How do you remove dresser drawers from bottom slides?

How to Remove Drawers With Stops?

1. Pull the drawer all the way out.
2. Lift the drawer slightly at an angle so that the drawer stop is clear of the top of the dresser.
3. Release the drawer slides by pushing the button/lever on the slides.
4. Gently pull out the drawer, still at an angle.

How do you remove soft close drawers from bottom slides?

How to Remove Drawers With Self-Closing Glides

1. Pull the drawer open until the guides are fully extended. Remove any items inside.
2. Look closely at the drawer guides and locate a locking lever or clip. If they use a clip, remove the clip.
3. Pull the drawer completely out of the rails.

How do you release a drawer slide?

Place one hand on the outside of one side of the drawer, and push it while lifting up on the bottom of the drawer with your other hand. This in-and-up movement will release the drawer from the slide mechanism.

How do you remove a sliding drawer?

Removing sliding drawers is simple once you determine what type of slide system your drawer uses. Pull the drawer open and remove everything that is inside. This helps to prevent accidentally dumping the contents on the floor and makes the drawer lighter. Extend the drawer fully.

How do I remove drawers?

Removing Drawers with Anti-Tip Cables Extend the drawer and look for the cable on the backside. Undo the screws holding the cable in place. Press and hold the disconnect tabs if your drawer has them. Slide the drawer straight off of its tracks.