What does a wye strainer do?
Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.
Where is a strainer used?
A kitchen device that is most used to strain liquids away from other ingredients but also to ocassionally sift fine ingredients away from larger ingredients. The Strainer may be formed as a spoon-shaped utensil or a basket-shaped strainer from various materials such as metal, nylon or cloth.
What is the work of strainer?
By definition a strainer provides a means of mechanically removing solids from a flowing liquid. They do this by utilizing a perforated metal, mesh or wedge wire straining element. If you add a blow-down valve the strainer can be flushed without stopping the flow through or disassembling the piping.
Why is it called a wye strainer?
Wye “Y” Strainers The most common type of strainer in most piping systems is the “Wye” Strainer. The name is derived from the fact that the shape of the strainer resembles a “Y”. Also the Wye strainer has a “blow down” feature so it is not necessary to remove the mesh each time the strainer is cleaned.
How do you know if you have a bad steam trap?
Condensate should usually be flowing through a trap, and the sound should have a lower pitch. So, if this sound changes and appears much closer to a higher pitched sound like that of steam flow, then the trap may have a large amount of flash steam or may be leaking live steam and should be inspected further.
Why are steam traps necessary?
The steam trap is an essential part of any steam system. It is the important link between good steam and condensate management, retaining steam within the process for maximum utilisation of heat, but releasing condensate and incondensable gases at the appropriate time.
Why do we use strainers?
What is the function of a Strainer? Strainers are important components of piping systems to protect equipment from potential damage due to dirt and other particles that may be carried by the process fluid.
Which is the best description of a strainer?
Strainers can be classified into two main types according to their body configuration; namely the Y-type and the basket type. Typical examples of these types of strainers can be seen in Figure 12.4.1.
How is saniguard treated in a basket strainer?
SANIGUARD treated inside and out heavy duty forged stainless steel basket strainer with 1 1/2 x 4 inch seamless brass tailpiece, die cast slip and lock nuts. Basket strainer and all metal parts are treated with inorganic antimicrobial compound.
What kind of stainless steel sink strainer does McGuire use?
SANIGUARD treated and prewrapped adjustable offset sink strainer. Includes 151A stainless steel strainer. Furnished with 17GA seamless brass waste arm, 17GA seamless brass tailpiece, cast brass slip nuts and heavy cast elbow. All metal parts treated inside and out with antimicrobial compound.
Why are two strainers used in a duplex system?
Basket type strainers are commonly found in a duplex arrangement. A second strainer is placed in parallel with the primary strainer, and flow can be diverted through either of the two strainers. This facilitates cleaning of the strainer unit whilst the fluid system is still operating, reducing the downtime for maintenance.