What does 5050 led strip mean?
Simply put, these LED chips are called SMD 5050 because the dimensions of the chips are 5.0mm x 5.0mm. They have 3 LED diodes in one housing (sometimes called tri-chips), and are a lot brighter than individual 3528 LED chips.
What’s the difference between 3528 RGB and 5050 RGB?
The 3528 typically contains a single 20 mA LED chip (approximately 0.06 Watts) and a 5050 typically contains three 20 mA LED chips (approximately 0.2 Watts). Therefore, a single 5050 LED package has the capacity of 3x 3528 LEDs. There are some 3528 RGB LEDs, but these typically contain only one color per LED.
Is 5050 led strip addressable?
The most common types of SMD are: 3528, single colour, non-addressable, very low power; 5050, containing three LEDs allowing for RGB and addressable strips as well as higher power levels; 2835, a newer single-color SMD having the same surface dimensions as the 3528 but a larger emitter area and a thinner design with an …
Which is brighter LED 5050 or 2835?
As mentioned above the 2835 SMDs can produce 360 to 720 lumens of light per meter of the light strip, depending on the LED density, however, the 5050 LED strip can produce up to a 1000 lumens per meter of light. This makes it perfect for lighting larger spaces like airports, hospitals, warehouses, factories, and more.
Which led is better 5050 or 3528?
5050 LED Strips are brighter than 3528 and one can get 5050 LED strips in either single colour or multiple colours (what is known as RGB ). What is also important is how many LED chips are used per metre because this effects the brightness.
How many lumen in a 5050 led?
A 5050 LED diode will illuminate brightness equivalent to approximately 18 Lumen A 5630 (5730) LED diode will illuminate brightness equivalent to approximately 50 Lumen The same goes for each chip’s power consumption, a 3528 LED will consume approximately 0.06 Watt, while a 5050 LED will consume approximately 0.18 Watt of power and a 5630 (5730) consumes about 0.5 Watt.
How many lumens is a 5050 led?
On SMD LED lights, lumens are simply calculated per chip. Larger 5050 SMD LED chips are rated at 15 lumens per chip. Our most common 5050 bulb uses 24 chips, so its calculated lumen output is 360 lumens (15 x 24 = 360 lumens).
What does 5050 SMD mean?
SMD stands for surface-mounted-device. In this case our device is an LED. 5050 stands for 5.0 mm by 5.0 mm. 3528 stands for 3.5 mm by 2.8 mm. That’s all you can be certain of, those two phrases are merely indications of size of LED components. This has nothing to do with any of the following specifications of the LED: color.