Why are my Keurig lights blinking?
Step 1: Ensure the Cold Water Reservoir is seated properly. Remove and reseat the Cold Water Reservoir to ensure alignment is correct. Yes: remove the Water Filter and run a water only brew (no pod) into a measuring cup. If the brew is successful, change the Charcoal Filter and put the Water Filter back in the brewer.
What Does flashing light on mini Keurig mean?
Why is the Brew Button Flashing Red on my MINI Plus / Keurig® K15 brewer? Under normal operation, the Brew Button will flash red when the brewer is heating and will turn solid red when brewing. If the Brew Button flashes red longer than 3 minutes, please contact Customer Service at 1-866-901-BREW (2739).
Can you reset a Keurig?
How to reset your Keurig coffee maker: What is this? Turn off your brewer, then unplug it for a few minutes. Remove the water reservoir before you plug your machine back in, then wait a few minutes.
How do you unclog a Keurig Mini?
Lift up the arm of the Keurig Mini to get it out of the way. Hold the water tube at its base while pinching it tightly. While maintaining pressure on the tube, slide your fingers along until the tip to push out any material clogging the hose. Repeat this process until all obstructions are removed.
What would cause my Keurig to stop working?
Your water pump isn’t functioning properly. The heating system inside is malfunctioning due to issues with the water pump. Calcium build-up or dried coffee grounds are clogging your Keurig causing malfunctions.
The cause of the blinking lights situation with a Keurig brewer is the machine has got itself into a state that it is unsure of its next step in the process. This is normally the result of an interrupt to what ever it was working through. This could be in the form of a power change, a break in signal from one…
How do you troubleshoot a Keurig?
Run the machine through a large cup brewing cycle, but do so without placing a K-cup in the unit. When the brewing is done, discard the contents of your coffee mug. Repeat this process three times. Leave the machine sit turned on for four hours, then empty the water reservoir and refill it with fresh water.
Why is my Keurig flashing red?
Under normal operation, the Brew Button will flash red when the brewer is heating and will turn solid red when brewing.If the Brew Button flashes red longer than 3 minutes, please contact Customer Service at 1-866-901-BREW (2739).