What are the different parts of ship?
Different Parts Of Ship And Their Function
- 1 ) Anchor. An anchor is a heavy metal piece attached to the chain cables and is stored or secured in the hose pipe during the voyage / ship operation.
- 2 ) Bow.
- 3 ) Bow Thrusters.
- 4 ) Accommodation.
- 5 ) Deck.
- 6 ) Ships Hull.
- 7 ) Keel.
- 8 ) Freeboard.
What is the front parts of a ship?
The front of a boat is called the bow, while the rear of a boat is called the stern. When looking towards the bow, the left-hand side of the boat is the port side. And starboard is the corresponding word for the right side of a boat.
What is the under part of a ship called?
A structural keel is the bottom-most structural member around which the hull of a ship is built. The keel runs along the centerline of the ship, from the bow to the stern.
What is the front and back of a ship called?
The forward of a ship is just as it sounds: It’s the most forward side, at the front of a cruise ship, facing the bow. The rear of a ship, at the direction of a ship’s stern, is called the aft.
Why is the front of a ship called the bow?
Etymology. From Middle Dutch boech or Old Norse bógr (shoulder). Thus it has the same origin as the English “bough” (from the Old English bóg, or bóh, (shoulder, the bough of a tree) but the nautical term is unrelated, being unknown in this sense in English before 1600.
What are rooms on a ship called?
Your room on a cruise ship is called a cabin or a stateroom, and there are four basic types or “categories.” Though some cruise lines will present 20 or more categories, most fall into the four basic types. A standard outside cabin is usually slightly larger than an inside stateroom.
What is a kitchen on a ship called?
The galley is the compartment of a ship, train, or aircraft where food is cooked and prepared. It can also refer to a land-based kitchen on a naval base, or, from a kitchen design point of view, to a straight design of the kitchen layout.