What size are telephone cable clips?
3.5mm Cable Clip x 50 Pack Telephone Cable Clips.
What is the distance between cable clips?
When fixing cables to exposed horizontal surfaces, the spacing of metal fixings should be approximately every 300mm. For vertical running cables that are exposed, a metal clip every 400mm is recommended.
What size cable clips do I need for 1.5 mm Flex?
Suitable for use with cable sizes as listed below; 1.5mm 2 core 3182Y. 1.5mm 3 core 3183Y.
Can you still use plastic cable clips?
Plastic cable fixings and plastic cable management have not been banned. They are still a cost-effective way of managing cables. It’s just that they can no longer be used as the sole method of support. Plastic cable ties and clips and plastic cable supports must all be adequately supplemented with metal supports.
What size are BT cable clips?
100x 3-4mm White BT Telephone/Phone Line Round Cable Clips – For 2 & 3 Pair Wire. Can be used with – These clips are usually used with 2 and 3 pair telephone cable but are also suitable for a variety of other cables.
What diameter is BT cable?
Most telecommunications cable has a 0.5mm diameter core. Some dropwire (notably dropwire 12) has 0.9mm core. The two sizes won’t punch down on the same connector pin together, so you would need to be clever with jelly crimps and 0.5 mm wire.
Do cables have to be clipped to joists?
Likely as not you have found a rewired house. You cannot reasonably expect cables to clipped during a rewire! On a new build installing with access then yes it is accepted that you clip cables to the joists….See Also:
Technical discussion forums | |
---|---|
· | Other and general engineering discussions |
Archived categories |
Where can you use fire rated cable clips?
Heat resistant cable clips can be used either within an encased cable run or installed directly onto the desired surface to prevent the risk of falling or trailing wires.