How do I fix windows inaccessible boot device?

How do I fix windows inaccessible boot device?

How to Fix Inaccessible Boot Device Error in Windows 10

  1. Solution 1: Uninstall the Recently Installed Packages.
  2. Solution 2: Update Your Drivers.
  3. Solution 3: Toggle AHCI Mode Value in BIOS to Enabled.
  4. Solution 4: Get Rid of “Update Pending” Packages.
  5. Solution 5: Check and Have all Corrupted Hard Drive Files Fixed.

How do I fix inaccessible boot device reboot loop?

Inaccessible Boot Device restart loop – According to users, sometimes you might get stuck in a restart loop due to this problem….Table of contents:

  1. Update your drivers.
  2. Run the BSOD Troubleshooter.
  3. Run the SFC scan.
  4. Run DISM.
  5. Check the hard drive.
  6. Reinstall your graphics card driver.
  7. Enter Safe Mode.
  8. Enable AHCI Mode in BIOS.

Why is my boot device inaccessible?

Common Causes of INACCESSIBLE BOOT DEVICE BSODs Most of the time, the INACCESSIBLE BOOT DEVICE error occurs because a boot device has failed or is unreadable. File system initialization could not recognize the data on the boot device. Device parameters for the boot device have become damaged, corrupted, or are invalid.

What does inaccessible boot drive mean?

When you see ‘Inaccessible Boot Device’, it means your computer cannot read the Windows partition on the hard drive it boots from. It could mean total hard drive failure. It could also be a simple driver or boot record failure too.

How do I fix inaccessible boot device with CMD?

Firstly, you need to open Command Prompt as an administrator. To do so, press the Windows key, type cmd, right-click on the result and choose Run as administrator. Within the Command Prompt app, type chkdsk /f /r and press Enter. Wait for the app to process your input, then type Y and press Enter.

How do I fix my boot device?

Fixing “Reboot and select proper Boot Device” on Windows

  1. Restart your computer.
  2. Press the necessary key to open BIOS menu. This key depends on your computer manufacturer and computer model.
  3. Go to the Boot tab.
  4. Change the boot order and list your computer’s HDD first.
  5. Save the settings.
  6. Restart your computer.

What are the steps in no boot scene?

Remove any media from optical drives when you see the non-system disk error or similar message on your monitor. Unplug any storage media, flash drives, memory cards and digital cameras as well. Reboot the computer. If the computer returns the same error message, proceed to the next step.

How do I force Windows to start in Safe Mode?

Press Windows key + R (force Windows to start into safe mode every time you reboot the PC)

  1. Press the Windows Key + R.
  2. Type msconfig in the dialog box.
  3. Select the Boot tab.
  4. Select the Safe Boot option and click Apply.
  5. Choose Restart to apply the changes when the System Configuration window pops up.

How do I boot to Safe Mode in UEFI BIOS?

Switch the computer on and off repeatedly with the power button. When nothing else works on your Windows 10 computer, you can try to open the UEFI blue screen by repeatedly and quickly turning the computer on and off using the power button. You’ll then be able to initiate a restart in safe mode.

How do I enable Boot Manager in Windows 8?

Option One: Hold Down Shift While Clicking Restart If your PC can start Windows normally, you can get to the “Advanced Options” menu quickly by just holding down the Shift key while clicking the “Restart” option. You can do this either on the sign in screen (shown above) or on the Start menu (shown below).

How to fix INACCESSIBLE BOOT DEVICE in Windows 10?

Once your system will reach into the Automatic Repair environment, select Advanced options. ( See Image 1) Image 1: In the Automatic Repair environment, select Advanced options c. Follow Troubleshoot > Startup Settings > Restart. d. Once the PC restarts, press F4 to enable the Safe Mode.

How to fix INACCESSIBLE BOOT DEVICE after clone?

You can use Windows Boot Genius – the ultimate Windows boot up solution to solve inaccessible boot device after clone. Launch the program and insert a CD/DVD disk or a USB on computer. Select CD, USB, or DVD option located on the main menu. Then click “Burn” to start.

Why do I get stop code INACCESSIBLE BOOT?

As mentioned in the introduction, stop code – Inaccessible Boot Device error or stop code – Unmountable Boot Volume error could also be caused by the hard drive of your PC. In this solution, we will be fixing hard drive issues via command prompt. Before we get into that, make sure to remove any external hard disk attached to your system.

What to do when your USB flash drive is inaccessible?

Select EFI volume in the startup selector. Once booted from the USB Flash drive, the correct Windows drivers can be injected into the version of Windows that is experiencing the INACCESSIBLE_BOOT_DEVICE error. Press fn-shift-f10 (or just shift-f10 depending on your keyboard) to open the Windows command line interface.