What training is required under Part 48 of the Mine Safety and Health Act of 1977?

What training is required under Part 48 of the Mine Safety and Health Act of 1977?

Part 48 requires training prior to performing work in or on mine property. This includes an operator’s responsibility to conduct mine-specific training.

How many hours is new miner training?

24 hours
When completed, your training will need to be certified by the person in your company responsible for mine safety and health training. This person is listed in your company’s training plan. The total time of study for New Miner is 24 hours, which must include first aid training (Review of First Aid Methods).

How long is MSHA Part 48 training?

8 hours
Mine Safety and Health Administration (MSHA) Part 48 regulations require that surface mining workers complete a minimum of 8 hours of refresher training each year.

Who needs MSHA Part 48?

All surface miners intended to work at metal, non-metal mineral, and surface coal mine operations, must take Part 48 MSHA training; new miners are required to take 24 hours of instructor-led training to obtain 5000-23 certification. Experienced or returning miners need 8 hours of Part 48 (subpart B) refresher training.

What is the difference between Part 46 and Part 48 MSHA?

Part 48 applies to all underground mines and all other surface mines that are not included in Part 46. Part 46 applies to the following types of mines: sand, gravel, surface stone, surface clay, surface limestone, colloidal phosphate, or shell dredging operations.

What is a 5000 23 form?

5000-23. Description: This is a mandatory collection of information as required by 30 CFR Part 48.9 and 48.29. The Certificate of Training Form 5000-23 provides a means for mine operators to record and certify Part 48 mandatory training received by miners.

How long is MSHA training?

All surface aggregate miners are required to complete MSHA Part 46 training; new miners must take 24 hours of training (available online), while returning miners need 8 hours of refresher training annually.

How long is MSHA Part 46 training?

Our 8-hour new miner training course includes everything you need to start working at a Part 46 mine. Once you complete the course, your employer will provide an additional 16 hours of training at the mine to teach you about site-specific hazards.

What does MSHA Part 46 cover?

Part 46 regulates the training and retraining of miners engaged in shell dredging or employed at sand, gravel, surface stone, surface clay, colloidal phosphate, surface limestone, marble, granite, sandstone, slate, shale, traprock, kaolin, cement, feldspar, and lime mines.

Who can train on MSHA Part 46?

Part 46 training is mandatory for miners, supervisors, construction workers and independent contractors who work at any of the following surface mining operations: Cement. Colloidal phosphate.