When using a safety monitoring system the monitor must be?
The monitor must have authorization to take prompt corrective measures to eliminate the hazardous conditions. The monitor must be on the same roof as and be able to visibly observe all other employees for whom he/she is responsible and must also be close enough to verbally communicate with the employees.
What are the fall protection safety requirements?
OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
What are four fall protection measures?
There are four generally accepted categories of fall protection: fall elimination, fall prevention, fall arrest and administrative controls. According to the US Department of Labor, falls account for 8% of all work-related trauma injuries leading to death.
What is the best fall protection control?
The preferred solution to all fall hazards is elimination. The reason for exposure to the fall hazard is challenged and evaluated to determine if a change in the procedure, practice, location or equipment will eliminate exposure to the fall hazard.
What happens in a safety monitoring system OSHA?
The safety monitor systems use a person (the safety monitor), rather than a mechanical system to warn roofers when they are six feet or more above a lower level and in danger of falling. The safety monitor, who must be a competent person, is responsible for recognizing fall hazards and warning workers about them.
What is a safety monitoring plan?
A Data and Safety Monitoring Plan is a quality assurance plan for a research study. A written Data and Safety Monitoring Plan (DSMP) prospectively identifies and. documents monitoring activities intended to protect the safety of the subjects, the. validity of the data and the integrity of the research study.
Is fall protection required on scaffolding?
Fall protection on scaffolding is required at 10 feet. In addition to falls from heights, workers also can slip or trip on ground surfaces that are uneven or cluttered with debris.
Who is responsible for fall protection?
Workers, employers and building owners all have their respective duties and responsibilities. Employers and their clients are required to ensure that adequate fall protection is provided for work at height.
What is the most common secondary fall protection system?
Typical secondary fall arrest systems include safety scaffolds, safety nets and personal fall protection equipment (PPE) when implemented to arrest falls.
How do you choose the most effective fall protection method?
Eliminating hazards is the most effective of all fall protection methods. It is on top of the Hierarchy of Controls. In this method, fall hazards are carefully identified, evaluated, and eliminated whenever possible. Removing these unsafe conditions can greatly reduce the incidence of preventable falls.
What is safety monitoring?
Safety monitoring is the regular checking of corporate safety standards and procedures. The monitor must be a competent person who is appointed by the company and does not have responsibilities that would distract him or her from their monitoring duties.