Do I need a servo buddy for a slip on exhaust?

Do I need a servo buddy for a slip on exhaust?

The servo buddy is by far the best solution to eliminating the servo motor. Plug in and forget. If you have only installed a slip on exhaust with no other changes you don’t need it.

Do I need a servo buddy?

Servo Buddy is a must-have when switching to an aftermarket exhaust, and even works great with a factory system if you want to eliminate the servo motor and fix the exhaust valve in the open position. Servo Buddy allows for a complete elimination of the servo motor, valve & cables.

What is the purpose of a servo motor on a motorcycle?

The purpose of this system according to the motorcycle manufacturers’ marketing departments is to create back-pressure at lower RPM’s to increase torque.

What does the servo do?

The servo is the device that is always used to control the steering of an RC car, and used to control the throttle on IC-engined (link to that definition) cars. They come as a single unit that contains all the electronics to control their motor, and a gearbox that leads to an output shaft.

What does an exhaust servo eliminator do?

About the Exhaust Servo Eliminator This tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.

What is exhaust servo?

What does an exhaust servo motor do? The cables are used to isolate the motor from the hot exhaust and allow it to be placed in a more convenient place on the bike. The purpose of this system according to the motorcycle manufacturers’ marketing departments is to create back-pressure at lower RPM’s to increase torque.

What is a servo motor and how it works?

A servo motor is an electromechanical device that produces torque and velocity based on the supplied current and voltage. A servo motor works as part of a closed loop system providing torque and velocity as commanded from a servo controller utilizing a feedback device to close the loop.

What does an exhaust servo motor do?

The exhaust servo motor controls the butterfly valve for the stock exhaust. When you turn on your bike you should hear it spin, thus opening the valve. You can remove the cables, with the valve in the open position, but this will throw an error code to your ECU and your FI light will come on.

How does exhaust servo work?

What does an exhaust servo motor do? This motor, which is controlled by the engine control unit, has a pulley on top that rotates the cables to open and close the valve in the exhaust. The cables are used to isolate the motor from the hot exhaust and allow it to be placed in a more convenient place on the bike.

https://www.youtube.com/watch?v=sXfFZ_PLjZg