Does SM57 need a preamp?
The SM57 is one of those dynamic mics that needs a good amount of amplification so an external inline or outboard preamp is recommended, especially if the preamps in your audio interface, mixer or field recorder aren’t the strongest.
Is the Shure SM57 good for vocals?
The SM57 Can Be Used on Studio Vocals. You can definitely record excellent-sounding vocals with an SM57 if you know what you’re doing. In some cases, an SM57 might even give you better results than a LDC microphone costing 20x more.
Is Shure SM57 balanced or unbalanced?
If a microphone has an XLR output connector, it outputs balanced audio. For example, the Shure SM57 dynamic and Rode NT1-A condenser microphones (pictured below) output balanced audio via XLR.
How do I get the best sound out of my SM57?
First, try placing the mike straight on but NOT at the middle of the speaker cone. Try it between to center and edge. Also try adding a little bit more distance to the mike from the speaker; another trick is to use both a mike on the cabinet and a DI or line out and mix the sounds.
Is SM57 good for guitar?
The Shure SM57 is a very capable microphone for recording an acoustic guitar. Its ability to eliminate unwanted noise make it a good choice to capture the acoustic guitar’s clarity and detail. Condenser microphones are the best option for acoustic guitar, but with care an SM57 can work well.
Why do microphones have 3 wires?
Signal/ground/shield are the three leads to a mono microphone. There are three leads because the cable is shielded or insulated against interference. The 1/4 inch phono plug compatable with this is “tip-ring-sleeve” however more popular and standard for microphones is “xlr” the industry standard.
Are all XLR balanced?
All XLR cables are balanced, except in a situation where the inner components have been damaged or malfunctioned. Likewise, several types of cables are almost always unbalanced. Differentiating between the two will ensure that you get the best results when recording or using them for live sound purposes.
What is the sensitivity of the Shure SM57?
Shure SM57 Datasheet. SM57 Cardioid Dynamic Microphone. SM57. Type Dynamic Frequency Response 40 to 15,000 Hz Polar Pattern Cardioid Sensitivity (at 1,000 Hz Open Circuit Voltage) Open Circuit Voltage: -56.0 dBV/Pa* (1.6 mV) *(1 Pa = 94 dB SPL) Impedance Rated impedance is 150Ω (310Ω actual) for connection to microphone inputs rated low impedance.
What’s the difference between the SM57 and SM58 microphones?
The SM57 has a built-in grille that’s actually part of the cartridge, which means that the diaphragm of the microphone can be placed a bit closer to the sound source, whereas the SM58 has a ball grille that also works as a regular pop filter.
What kind of microphone is Shure Beta 57A?
Shure BETA 57A Supercardioid Dynamic Microhone with High Output Neodymium Element for Vocal/Instrument Applications. The Shure Beta 57A is a great all-around microphone for both vocalists as well as instruments like drums, horns, woodwinds, and guitars.
Which is better the ball grille or the SM57?
The ball grille is really good at reducing the plosives as well, which is why it’s a better vocal microphone than the SM57. It has a slight boost in the presence frequencies which simply helps bring out some clarity in the vocals.