What does F5 mean on my Whirlpool oven?
The F5 on most Whirlpool ranges will indicate that you have a problem with the oven door latch assembly or the oven door switch. If this switch is apparently operating properly then your failure is likely in the door latch assembly that normally locks the door before the clean cycle starts.
How do you reset the F5 code on a Whirlpool stove?
Persistent F5 Errors Press and hold any key for one minute to clear the error code, and an F2 code should appear. Press CANCEL and observe the stove for one minute to see if the F5 error reappears. If the error persists, it’s time to replace the latch.
Why does my oven beep and say F5?
F5 – Control Board Failure – Replace control board (clock).
How do I clear my E1 F5 Whirlpool oven?
You should disconnect power again for 15 seconds and reconnect and see if that helps. If it doesn’t cure the E1- F5 error hold the bake button in until E0- F2 appears in the display. This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.
How do you clear a Whirlpool oven code?
Plug the oven power cord back in or turn ON circuit breaker. Press CANCEL on the display. If fault code comes back after 1 minute then replace the keypad. If F2 E0 persists then replace the electronic oven control.
What does F5 and E2 mean on a washing machine?
The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.
What does E1 F5 mean on a Whirlpool self cleaning oven?
door latch switch failure
The error code E1-F5 indicates a door latch switch failure or a door lock motor/solenoid failure. A technician will be required to make these checks. If the door latched: Disconnect power to the range. Check the wires and connections from the control to the door switch, then from the door switch to the control.
What does E1 or F5 mean on a oven?
The “E1 F5” error code is a door switch malfunction. This may display if the door is not shut properly, if it is jammed or if the spring-loaded mechanism has broken.
How do I fix F5 error on washing machine?
What does E3 and F5 error code?
The F5 E3 alert indicates there is issue with the lid lock. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.