How do I turn off the alarm on my Harley?

How do I turn off the alarm on my Harley?

Before the security lamp goes out, turn the ignition switch to OFF. Within three seconds, simultaneously press both the left and the right turn signal switches. After the turn signals flash once, the system enters the transport mode. With the fob removed, the motorcycle can be moved without setting off the alarm.

Why is my Harley asking for a PIN number?

If you have a security-equipped Harley-Davidson, you know that without your key fob present, the bike will not start. Using the left turn signal to cycle through the digits and the right turn signal to select and move onto the next slot, you enter your personalized five-digit PIN and your bike will start.

What does the key symbol mean on a Harley Davidson?

The red “key” light is telling you that the security system is operational. The fact that it goes out after you start it up means that the security system is disarmed.

What does the red key light mean on a Harley?

How do you reset the security code on a Harley Davidson?

To reset the code with a HFSM equipped bike (no button fob), you will:

  1. Have your key fob near the bike.
  2. Set your kill switch to off.
  3. Quickly turn the ignition switch on, off, on, off, on.
  4. Immediately press and let go of the left turn signal switch twice (press, let go, press, let go)

How do you reset the PIN on a 2012 Harley Davidson?

  1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window.
  2. Enter the first digit of your PIN by pressing the LEFT turn signal switch (X) times.
  3. Press the RIGHT turn signal switch 1 time to move to the next digit.

When does a Harley Davidson alarm go off?

If you’ve got a Harley-Davidson equipped with a security system, your motorcycle’s motion sensors are going to trigger the alarm when it senses that it’s being moved. After 600 miles or so in the back of that trailer, all those blinking lights will have run your battery dry.

How to reset the security system on a Harley Davidson touring?

With a proximity fob system, press the left turn signal switch three times and the right turn signal switch once. The blinkers will flash and the PIN should appear in the odometer window. With a push button fob, press the left turn signal three times, then the key fob twice, and the PIN will appear.

How do I Turn Off my HD security alarm?

Press the right turn signal switch 1 time to move to the next digit. Enter the fifth digit of your PIN (e) by pressing the left turn signal switch (e) times. Press the right turn signal switch 1 time to move to the next digit. Press the right turn signal switch one time and the security system alarm is turned off.

How can I move my motorcycle without an alarm?

Within three seconds, simultaneously press both the left and the right turn signal switches. The turn signals will flash once, and the system enters transport mode. Remove the fob- your motorcycle can now be moved without triggering the alarm.