How much does crushed stone cost?

How much does crushed stone cost?

Crushed stone is costlier at about $55 per cubic yard and $65 per ton….Gravel Price Estimator.

Materials Price Per Square Foot Cost Per 100 Square Feet (with labor)
Gravel $0.70 $100
Rock Base $0.65 $95
Crushed Stone/ Limestone $2 $230

How do you use crusher fines?

Spray the crusher fine with water before your last tamp….And we were done ahead of schedule after:

  1. Spending 2 to 3 months cleaning out old rock and installing new crusher fine.
  2. Moving and replacing more than 500 border rocks.
  3. Laying about 10.5 rolls of 50-foot landscape fabric.
  4. Adding nearly 200 new pavers.

Is crusher run good for driveway?

Quarry process stone—also known as crusher run—is another good option for the top level of a driveway or walkway. Composed of a blend of smaller crushed stone and stone dust, crusher run typically includes a higher percentage of stone dust fines.

Who owns JPR gravel?

JPR Decorative Gravel is locally owned and operated by three sisters: Julie, Patsy, and Racquel.

Is asphalt cheaper than gravel?

Economical option. Homeowners appreciate the sleek appearance of an asphalt-paved driveway at a lower cost than concrete or paver surfaces. Asphalt driveways typically cost $2 – $5 per sq foot to install – more than gravel, but much less than many other options. …

Is crusher dust good for paths?

Crusher dust, or quarried and crushed rock too small for use on roadbeds, makes an excellent material for a pathway. Rain, time, and foot traffic will cause it to harden to near concrete firmness.

How thick should crusher fines be?

4-6 inches
Crusher fines applied over landscape fabric to a depth of 4-6 inches. Accessible crushed stone trails should be designed and constructed at grades less than 8% grade to promote accessible use.

How much does a ton of crusher run cover?

Calculate Crusher Run

Coverage (Square feet) 400 sq ft
Estimated amount (Pounds) 5,951 lb
Estimated amount (Tons) 2.98 ton
Amount +15% compression 3.42 ton
Prices for Crusher Run

How thick should crusher run driveway be?

Most of the time, you will want 1-1/2 inch Crusher Run or 3/4 inch Crusher Run for your driveway or road. This material spreads well, and packs down like concrete. The 3/4” is a little easier to work with smaller tools or equipment.

What is gravel and sand?

Sand is a granular material derived from the erosion of rocks, ranging in size from 0.075 mm to 4.75 mm. Gravel is a granular material derived from the erosion of rocks, ranging in size from 4.75 mm to 75 mm. Gravel particles are larger than sand but smaller than boulders.

How many tons of gravel do I need?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.