# How do I calculate the size of my pondless waterfall reservoir?

## How do I calculate the size of my pondless waterfall reservoir?

As a general rule, you will need your basin to hold 2½ times the amount of water in your stream. To find out how much water your basin will need to hold, multiply the gallons of water in your stream by 2.5. In the above example, it would be 93.5 x 2.5 = 233.75 – so your basin would need to hold 233.75 gallons of water.

## How do you make a pondless water feature?

How to build a pondless fountain

1. Dig a hole to fit basin.
2. Place basin in the hole.
3. Assemble the pump.
4. Cover pump with cloche or cheese cloth and anchor to bottom of basin.
5. Place metal grate on top of basin level with the ground.
6. Cover the grate with hardware cloth (screen)

How much does it cost to have a waterfall installed?

On average, homeowners should expect to pay between \$1,000 and \$3,000 for a waterfall, with an installed 12-square-foot pool waterfall costing about \$1,500….Cost to Install a Waterfall.

Waterfall installation costs
National average cost \$1,500
Average range \$1,000-\$3,000
Minimum cost \$100
Maximum cost \$20,000

How much water is needed for a waterfall?

It takes approximately 36 gallons per minute to make a waterfall 1′ wide x 1″ deep (1″ deep water is considered an average depth for residential applications).

### Can you have a water feature without electricity?

Yes, water features need electricity to pump the water round. Water features can be wired into the mains or solar powered. Many do not need to be plumbed into mains water and simply run off an internal reservoir.

### How does a pondless waterfall in the ground work?

How a Pondless Waterfall Works A Pondless Waterfall is simply a re-circulating waterfall or stream without the presence of a pond. Pondless waterfalls work by pumping water contained in a large, in-ground reservoir up and through the Waterfall Spillway, allowing the water to flow back down into the reservoir.

Is there such a thing as a pondless water fountain?

A pondless water fountain is a decorative water feature. They can be standalone centerpieces or be added into an existing pond. The best part: they have many of the same benefits as ponds, but with less maintenance. Pondless fountains come in a wide variety, including:

How can I Keep my pondless feature working?

To keep your feature functioning properly, occasionally check the water level or install an auto fill valve. Simply connect this kit to any garden hose or ½” irrigation line and it will replace any water lost to splashing or evaporation.

## Do you have to clean a pondless waterfall?

Without fish or open water, pondless water features are pretty easy to maintain. Typically these features do not have filter systems that you have to regularly clean, but there are a few simple tasks that require attention. Here is a quick checklist for keeping your waterfall looking its best: