How do I know what size casters I need?
Ideally, the caster should be able to swivel a full 360 degrees. To determine this measurement, lay the caster down on its side again and measure from the back edge of the wheel to the very center of the kingpin. You can use a straightedge against the wheel face to make it simpler, too.
Are bigger caster wheels better?
Bigger wheel size will convey loads/goods faster and cover more grounds compared to smaller caster wheel size. They also have more strength to carry heavier loads and handle larger weights. Casters with larger wheel sizes are often used for heavy-duty purposes where heavy loads need to be transported every time.
What is the difference between a wheel and a caster?
The wheel is limited in that it only spins on a single axis. It can only roll in one direction at a time. Casters incorporate wheels into their designs, but they are a bit more sophisticated. A caster includes the mounting system that holds the wheel in place.
How much weight can caster wheels hold?
Casters come in three weight ranges. Light duty casters are for loads of up to 500 lbs. Medium duty casters are for weights of between 501 and 2,000 lbs. And heavy duty casters are for weights of more than 2,000 lbs.
Are big wheels easier to push?
Wheelchairs having larger rear wheels are easier to push because they have less weight to roll than their weight and structure. So, yes, wheelchairs with big wheels are easier to push than wheelchairs that have smaller, more compact wheels at the rear, which hinder the control and movement of the wheelchair.
Are uneven ground wheels easier to roll on?
As a general conclusion, then, we see that in each of these circumstances – uneven, soft or debris covered surfaces – larger diameter wheels will perform better than smaller diameter wheels.
How does wheel size affect performance?
If you choose bigger wheels, you will improve the stability of your car and the range of braking distance will be shortened; A larger diameter means that the wheel will be heavier and consequently speed will be slightly compromised during acceleration (depending also on the torque of the car);
How do you calculate caster load?
Calculating the load you need for each caster or wheel is simple: just divide the weight of the furniture, equipment, or cargo by the number of casters. Let’s say, for example, that you’re buying replacement casters for a four-wheel cart that’s used to carry loads of up to 200 lbs.