How deep can you dig with a mini digger?

How deep can you dig with a mini digger?

It can be necessary to hire an excavator for landscaping or extension footings, the 1.5 Ton Mini excavator fits through most garden gates and can dig to depths of 2.1 metres.

How long does it take to dig a trench with a mini excavator?

Dug, pipe laid and backfilled about 11 to 13hours, only digging can be done in 9 hours or so. We average 280-300 ft per hour digging a 48″ deep trench with an excavator putting in non grade lines to pivots. Usually we step the trench about a foot for ease of access.

How deep can a 1.5 ton digger dig?


Operating weight: 1495kg
Width: 990mm
Maximum digging depth: 2250mm
Maximum loading height: 2290mm
Fuel tank capacity: 21ltr

How far can a digger reach?

An excavator can dig between 10 to 48 feet deep. You shouldn’t push an excavator beyond its limits because it could overheat the engine, bend the bucket, or break the mechanical arm. If you want to dig deeper than 48 feet, you’ll have to create a slope to drive the vehicle down, then continue to dig.

How deep can a 3t digger dig?

3 Ton Mini Diggers are the work horse of the utility sector, with a class leading dig depth of 2.7m and a good amount of power they are able to make short work of trenches even in ground with a high clay content. With a weight of 2600KG these machines are capable of being towed behind commercial vehicles.

How long does it take to trench 100 ft?

about 12 hours
It takes about 12 hours to dig 100 linear feet of trench. Measure the number of linear feet you need to dig and multiply that by 0.12 for an approximate labor period.

What kind of trench digger do you need?

It has a spinning serrated blade that creates deep edges for clear definition, and the preferred depth can be set. The two-in-one design can also make the trenches needed for invisible fences or boundary wires. This corded edger does the hard work for you, with little effort. Weighing under 15 pounds, it’s easy to maneuver, even on corne… .

When to use a trencher in a garden?

Vertical and horizontal blades do the work, while the curved back cultivates and grooms the soil. This tool is best used when soil is slightly dry. This isn’t a tool for cutting edges, but it keeps existing beds and borders looking their best by slicing through the grass roots t…

What kind of Edger do I need for my Garden?

This edger will cut through turf for precise edges around both beds and walkways. It can be used for curves as well as straight lines to highlight interesting features in your garden. The footplate makes pushing more comfortable, and the steel grip and handle ensure it’s strong and durable.