How much water can a 1/4 HP pump move?
✔️【1/4 HP POWER ENERGY】Efficient Motor with thermal overload protection, Maximum lift water up to 16.5 feet and 25 Gallon Per Minit with 1″ discharge hose horizontally.
How much HP do I need for sump pump?
1/3 horsepower
The horsepower requirement for a house is determined by the area of drainage connected to the sump, the depth to groundwater, the depth of the basement and many other factors. A 1/3 horsepower (hp) pump is satisfactory for most houses, but a 1/2 hp pump doesn’t cost that much more.
How far can a 1/3 HP sump pump push water?
1/3 HP Submersible Sump Pumps For most average-sized homes in areas with average water tables, a 1/3 HP sump pump should be sufficient. Typically, 1/3 HP pumps can handle 7′ – 10′ vertical lifts from the sump pit if they have one 90-degree elbow and a horizontal pipe run between 3 feet and 25 feet.
How far will a 1/2 HP sump pump push water?
A 1/2 HP sump pump can handle 7 to 10 feet vertical lift off the sump pump, a 90-degree elbow and a horizontal pipe running between 3 and 25 feet.
How high can a 1/2 HP pump push water?
A two-line jet pump can typically raise water from depths of 30-feet to 80-feet, and at water delivery rates of 4 gpm (gallons per minute) (for a 1/2 hp 2-line jet pump serving an 80 foot deep well) to 16 gpm (for a 1 hp 2-line jet pump serving a 30 foot deep well).
What are the top 5 sump pumps?
The Best Sump Pumps for 2020
| Model | Brand | GPM |
|---|---|---|
| 148011 | Utilitech | 55 |
| 30011-4 | AquaPro | 64 |
| CDU800 | Wayne | 53 |
| BW1050 | Basement Watchdog | 74 |
How much water can a 1 hp pump move?
Number of submersible well pump stages determine pump lift capacity
| Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity | ||
|---|---|---|
| Water Pump HP | Nr. of Pump Stages | GPM Flow Rate Capacity |
| 1 HP | 8 | 4 – 40 GPM (varies by TDH) |
| 1 1/2 HP | 11 | 4 – 40 GPM (varies by TDH) |
| 2 HP | 14 | 4 – 42 GPM (varies by TDH) |
How deep can a 1 HP well pump go?
a 1 hp. submersible well pump – varying by model – can deliver 10 gph while lifting water from a 200 ft. deep well. a 1 hp submersible well pump – varying by model – can deliver 23 gpm at 40 foot lift, down to 14 gpm if that same pump has to lift water from greater depth.