Is BendPak a good lift?

Is BendPak a good lift?

The majority of reviews of the best car lifts include BendPak as the best possible choice for a reason: our quality, durability and longevity are more important factors than price alone. In fact, BendPak consistently takes the top spot on these lists, including this cherry ranking as the best four-post lift.

Where are BendPak lifts made?

Santa Paula, CA
BendPak® engineers at our factory headquarters in Santa Paula, CA retain all responsibility for product designs and for performing strength and structural reviews to ensure structural integrity of our entire line of products.

How wide is a BendPak car lift?

Capacity / Wide Car Lift / High Rise. BendPak’s HD-7W is the standard-width car lift model in the HD-7 series. With a 110.25” overall width and a spacious 100.25” spread between the columns, there’s plenty of room to park most cars and trucks in the lower position. This leaves ample space for you to maneuver.

How wide is a BendPak 2 post lift?

BendPak XPR-10AS Asymmetric Dual-Width 2 Post Lift 10,000 lb. – New Gray

Specifications XPR-10AS
B – Width Overall (WIDE CONFIG) 145″ / 3,683 mm
C – Width Outside of Columns (NARROW) 133″ / 3,378 mm
C – Width Outside of Columns (WIDE) 141″ / 3,581 mm
D – Floor to Overhead Switch 141″ / 3,581 mm

How much does it cost to put a lift in a garage?

Typically a top-quality car lift installation starts from around $660.00 – however, before you start any new installation, you should always have a pre-installation site inspection undertaken by a reputable car lift installation company.

How thick should a concrete slab be for a car lift?

4 inches
Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed.

How thick should concrete be for 2-post lift?

Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed.

How much clearance do you need for a garage lift?

If you are trying to convert your home’s garage to an automotive workplace, you need to consider the height of the ceiling before buying a hoist. In most cases, a 12 foot minimum amount of clearance is required for a two-post lift.

Is the bendpak xpr-10as a direct drive lift?

Every XPR-10AS features Direct-Drive technology that’s only available with BendPak. The asymmetrical design of this lift has rotated columns, which makes it easier to enter and exit the vehicle and reduces the chance of door dings and dents. FREE SHIPPING!

What kind of piston is in bendpak xpr-10 hydraulic cylinder?

Integrated into every XPR-10 Series hydraulic cylinder is a one-piece, pilot-fitted machined steel piston that is wrapped with specially designed, pressure-loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass.

Is there a 10K capacity bendpak car lift?

A 10K capacity BendPak car lift is a smart addition to any shop or garage. Professionals love the power and reliability of the lift, and they know our reputation precedes us. Meanwhile, DIY’ers with high ceilings know BendPak means safe lifting in the comfort of home.

How does a bendpak two post lift work?

Free-flow, high-pressure 3/8″ hydraulic lines, high-flow pump and integrated AC power unit work together to make a speedier two-post lift. A padded shutoff switch extends across the top of the overhead beam, automatically stopping lift movement when activated.