How is auditorium area calculated?

How is auditorium area calculated?

The amount of space required for each auditorium depends on a number of factors but the following guides, based on modern seating design can give you an idea of the area needed: 200 seats: 270m² | 2,900 ft2. 150 seats: 190m² | 2,000 ft2. 75 seats: 125 m² | 1,350 ft2.

What is the size of an auditorium?

Auditorium

Description Tenant Occupiable Areas Qty. Space Req’d.
Main Auditorium
Seating (300 seats) 1 3,600
Stage 1 1,200
Support Spaces

What are the areas of an auditorium?

Auditorium structure

  • Stalls, orchestra or arena: the lower flat area, usually below or at the same level as the stage.
  • Balconies or galleries: one or more raised seating platforms towards the rear of the auditorium.
  • Boxes: generally placed immediately to the front, side and above the level of the stage.

How high is an auditorium stage?

Auditorium Stage Assume that the typical stage is 30-35 feet deep with a proscenium opening of 40-50 feet wide, and up to 30 feet tall. The side stage should be at least half the size of the proscenium opening on each side.

What should be the height of auditorium?

2. Size and Shape The average height may vary from 6 m for small halls to 7·5 m for large halls.

What are the requirements of auditorium?

Welcome back.

  • The initial sound should be of adequate intensity.
  • The sound should be evenly distributed throughout the hall.
  • The successive nodes should be clear & distinct.
  • Noise has to be taken care of.
  • The size & the shape of the ball has also to be taken care.

What kinds of activities go on in an auditorium?

It is used for all types of formal assembly: lectures, award ceremonies, dramatic plays, musical theatre productions, concert performances of orchestra, band, chorus, jazz band, battles of the bands, dance competitions and so on. These varied events place a range of demands on the room.

How do you determine stage size?

If you anticipate having 100 people dancing at your event, plan on a stage area that measures at least 30 feet by 30 feet in size. With this amount of space, each person will have enough room to take two steps before coming into contact with someone else.

How big is a small Theatre?

A small drama theatre usually seats between 50 and 300, with an upper limit of perhaps 400. It often doesn’t have a separate stagehouse—meaning the stage is within the same architectural space as the audience. These small theatres often feature a unique or especially intimate actor/audience relationship.

How high is a small stage?

They start all the way at six or eight inches. It’s pretty much a little platform on the ground just for smaller groups, for more intimate feeling stages and events where you’ve got a small group of people. You don’t really need somebody to be way up high so that lots of people can see them.

How big should a seating area be in an auditorium?

Assign a generic space requirement for each seat—this varies—but ten square feet per chair would probably be adequate for most layouts. This will allow for a general idea of the size of the room. Consult local egress codes to determine the required number/locations of exits, aisle locations and clear width, and back-to-back row spacing.

How to calculate the room area per person?

The table below can be used as a guide to required area (square metre or square feet) per person inside some typical buildings and rooms. The values can be used to calculate human sensible and latent heat load. Note! – be aware of local restrictions, codes and their minimum values. They may diverge considerably from the numbers above.

How big is an end stage in an auditorium?

However, the end stage is not the most desired form if you want to create an intimate experience between performers and spectators. Here’s an example of the end-stage form with dimensions: Seating area: 1218 sq. ft. Space per seat: 6.8 sq. ft.

What are the lighting requirements for an auditorium?

Building codes will provide auditorium seating layout and clearance requirements. Special Lighting: Dramatic lighting systems include front lighting, foot lighting, spot lights, follow spot lights, beam lights, and flood lights, and a projection room/booth with manual and programmable lighting controls, and space for the spot light operator.