How long are GMC Sierra wheel studs?
Dorman – Autograde – M14-1.50 Serrated Wheel Stud – 15.70mm Knurl, 65.4mm Length (sold by each) (Part No. 610-428) When it comes to your wheels, don’t take chances. Our wheel studs are corrosion resistant and produced to strict engineering quality standards.
Are extended wheel studs safe?
A wheel stud can only bend if the lug nuts are not properly torqued, in which case the wheel is about to fall off, anyway. Therefore, properly installed wheel spacers are perfectly safe. The wheel stud applies a clamping force that holds the wheel to the hub.
How long are s10 wheel studs?
41.5mm
Dorman – Autograde – M12-1.50 Serrated Wheel Stud – 12.73mm Knurl, 41.5mm Length (Part No. 610-254.40)
Why do drag Cars have long wheel studs?
The idea behind long wheel studs is to accommodate thicker wheels and/or spacers often used to fit wide tires on the car.
How long are Chevy wheel studs?
65.4mm
Dorman – Autograde – M14-1.50 Serrated Wheel Stud – 15.70mm Knurl, 65.4mm Length (sold by each) (Part No. 610-428) When it comes to your wheels, don’t take chances. Our wheel studs are corrosion resistant and produced to strict engineering quality standards.
Do I need longer wheel studs?
Longer studs are not needed. Only when you run a spacer that is larger than 10mm will you need longer studs. The lugs have to go in at least 8 turns. longer studs are needed when you can’t use enough thread of the OE stud.
Are wheel spacers NHRA legal?
No stacking of wheel spacers allowed. Maximum rim width on any car: 16 inches. No rear wheel discs or covers permitted in any category. Top Fuel and Funny Car rear wheels must meet SFI Spec 15.4.
What size wheel spacers are safe?
As a rule of thumb, you want at least the same amount engagement as the stud is wide. For example a M12x1. 5 stud would need at least 12mm of thread engagement to be safe. At a 1.5mm thread pitch, this equates to about 8 full turns of the lug nut.
Will wheel spacers hurt my truck?
Whether it’s because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender. So, are they dangerous to use? In a one-word summation, no. Wheel spacers can be used to change wheel bolt patterns and to widen the offset of the wheel.
What kind of nuts are in ARP wheel studs?
ARP Wheel Studs – heat-treated 8740 chrome moly, tensile strength of 200,000 psi, sold in 4 or 5 packs, cadmium plated for extra durability, nuts not included
What kind of studs do NASCAR drivers use?
NASCAR Speed Studs – heat-treated 200,000 psi chrome moly steel, precision J-form threads (formed after heat-treat for improved fatigue strength), nut-starter and bullet shape radius, shot-peened, baked-on dry film lubricant, and double magnaflux inspection, fits the registers of all popular hubs without grinding
How big should wheel spacers be on GMC trucks?
I think 1″ wheel spacers is the max you can use without needing longer studs, but I could be wrong. napa auto parts has them here. idk about there….but def get longer studs. dont just put a 1″ spacer without replacing them…your lug nuts would only be catching like 3 threads