How often do shocks need to be replaced?

How often do shocks need to be replaced?

every 50,000-100,000 miles
Generally, shocks and struts wear out every 50,000-100,000 miles. If you’re a more aggressive driver and/or frequently drive on rough roads, they will wear out faster. Shocks and struts don’t go out all at once; they deteriorate slowly over time.

Can I drive with bad shocks?

If your shocks and struts go bad, you shouldn’t drive your car for long. Driving with bad shocks and struts is a safety risk because the stability of your vehicle is compromised. You will experience poor handling, excessive body roll, a wobbly steering wheel, and poor traction.

How hard is it to replace shocks?

Shocks are pretty straightforward—you usually just have to disconnect the top and lower mount to be able to remove them. However, on certain cars, you may need to remove some paneling to gain access to the shocks.

Is it OK to drive without shocks?

Shocks are for slowing suspension movment. So with no shocks, you will get more body roll, you hit a bump and youll be bob up and down for a while it will just be annoying as far as I know, nothing BAD about it, it will most likely be a bit harder on your bushings but not too bad.

Is an alignment necessary after replacing shocks?

In general, you don’t need an alignment done after replacing shocks on a vehicle with the older style front suspension typically found on rear wheel drive vehicles. Replacing those shocks has nothing to do with the alignment whatsoever unless the spring has lost some of it’s tension.

What are the best auto shocks?

Overall, the B6 series by Bilstein is the best car shock absorbers without having to spend a large amount on the dealership alternatives. The B6 Series will improve the handling performance and control of your car and therefore worth spending the extra.

Who makes the best shocks?

KYB makes the best shocks and struts list because of their ability to adjust the dampening without the need for a full coil over kit. Thus, you can soften them up for driving on the road but crank them up when you need some superior performance handling for a weekend of autocross racing.

How do you replace struts and shocks?

How to replace shocks and struts 1. Check whether you need a spring compressor 2. Securely raise one side of the car 3. Remove the wheel and extract the old shock/strut 4. Install the new shock/strut 5. Don’t forget the test drive!

What are the best pickup truck shocks?

Best Truck Shocks for a Smooth Ride – Make a Comfortable Ride Best Truck Shocks for a Smooth Ride 1. Monroe MA822 Max-Air Adjust Shock Absorber 2. Bilstein 24-187367 5100 Series Front Shock 3. Monroe 58640 Load Adjusting Shock 4. KYB 565102 MonoMax Gas Shock 5. Monroe 911262 Reflex Truck Shock Absorber