Is it safe to use 10w30 instead of 5w20?
Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won’t spray your lower cylinders for an extra second or so on each cold start.
Is 5W-30 or 10W-40 better?
The smaller the number, the better it will flow. So a 5W-30 will flow easier than a 10W-30 at start-up temperatures and a 10W-30 will flow easier than a 10W-40 at normal engine operating temperatures. This is important, as engine oils naturally thicken as they cool and thin as they are heated.
Which is better 5W 20 or 10W-30?
So, that means when you are comparing 5w30 vs. 10w30, the thinner 5w30 will circulate quicker, and flow through bearing tolerances better during an engine startup in the winter or colder climates. This enables the 5w20 motor oil to reach engine parts quicker and create less drag that reduces fuel economy.
What happens when you use 10w40 instead of 5w30?
As posted above, mixing 5w30 with 10w40 will give you an oil that performs somewhat better in the cold than 10w40, but less good cold than 5w30, and that has a viscosity a bit higher than 5w30 but a bit lower than 10w40. Mixing different oils will not improve the performance or efficiency of the engine in any way.
Will 10W-30 oil hurt a 5W20 engine?
Modern cars are designed to use lower viscosity oil ranges, so they can properly lubricate ( see attachment) Going from 5w-20 to 10w-30 should cause no harm for one oil change. But if you engine as designed for 5W-20, give it 5W-20.
Will 10w40 hurt a 5w30 engine?
Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.
Will 5w30 hurt a 5W20 engine?
Due to the increased resistance of the thicker 5W-30 oil, your engine will produce slightly lower fuel economy and horsepower output. You also risk engine damage when using 5W-30 instead of 5W-20, as the internal engine components are specifically designed to be used with 5W-20 motor oil.
Will 5W30 hurt a 5W-20 engine?
What is 10W 20 oil used for?
MOTOR OIL EXTRA SAE 10W/20 is suitable for vehicles, motorbikes and stationary systems that are operated with monograde motor oils. EXTRA SAE 10W/20 monograde oils can also be used in specific gears and hydraulic systems for which monograde motor oils are required.
What is the best 5W 30 motor oil?
Castrol discovered a groundbreaking new fluid titanium technology.
Is it appropriate to use 5W30 oil instead of 5W20?
You can use 5w30 instead of 5w20 if your engine allows for it. Some engines can safely use both kinds of oil and it will be mentioned in your owner’s manual if that’s the case. if your engine is not designed to use both weights of motor oil then you are putting the engine at risk if you take 5w30 instead of the 5w20 that it was formulated for.
What is the difference between 5 W 30 and 10 W 30?
Both 5w30 and 10w30 engine oils have a similar SAE rating, meaning that they will perform the same at high or operating temperatures. The digits 30 indicate the viscosity of the oils when in high temperatures. 10w30, however, will thicken more when in a cold climate. 5w30 is much suitable during the cold season.
Can I use 10W30 instead of 5W30?
There is no major issue should you use 10w30 instead of 5w30. Sometimes, it is even preferable to get thicker oil when running on engines with higher mileage. Another minor benefit of utilizing 10w30 is that it contains less improvers in viscosity.