How long does por15 take to dry?
3 to 6 hours
HOW LONG DOES IT TAKE POR-15 TO DRY? That depends on the ambient humidity (surrounding area). The more humid the area, the faster the dry time, which usually varies from 3 to 6 hours.
How do you use metal ready?
After thoroughly degreasing your surface apply Metal Ready to both neutralise and remove rust. Surface rust removes in minutes. Allow up to half an hour and repeat if necessary. Do not leave it on for long periods.
Do you Stir por15?
POR-15 likes to adhere to surfaces with “tooth” rather than smooth, glossy surfaces. STIR CONTENTS THOROUGHLY before painting. Do not shake. Refrigerate unused portion of POR-15 for longer shelf life.
Do I have to wash off por 15 Metal prep?
Must I wash off the Metal-Ready after using it? Yes… If Metal Ready is not rinsed off you will get a large accumulation of zinc phosphate on the surface which will affect proper adhesion with POR-15.
How long should por-15 dry before second coat?
Dry time: It cures to touch in 30-60 minutes. Second coat can be applied in 2-72 hours, depending on ambient temperature and humidity. POR-15 Top Coat can take 3-4 days to reach maximum hardness, and longer in temperatures below 55°F (15°C). Cleanup: Do not put leftover paint back into can.
Does por 15 stick to galvanized metal?
You must use Metal-Ready first if you are painting POR15 on new steel, galvanized metal , aluminum, or any smooth metal surface.
Can you use por 15 over rust?
POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust.
How many coats of POR 15 do I need?
Application Information states : under supplementary information and tips: – For two coat applications- apply second coat when first coat is tacky and almost dry.
How long should POR 15 dry before second coat?
When should I apply the second coat of POR 15?
Apply POR-15 in thin coats. For Two Coat Application: Apply second coat when first coat is tacky but almost dry. If first coat is fully cured, wet sand first coat with 600 grit sandpaper until gloss is dulled.