Is the power pole remote waterproof?

Is the power pole remote waterproof?

The Power Pole CM2 Remote Control Transmitter Fob with C-Monster 2.0 allows you to enjoy wireless control from anywhere on your boat. Included with a floating lanyard, the Power-Pole CM2 Remote Control Transmitter Fob features double-click for auto-up/down and it’s completely waterproof.

What type of battery does power pole remote take?

CR2032 3V Lithium Coin Battery
4. Remove the battery from the holder on the front of the board and replace with any CR2032 3V Lithium Coin Battery. 5. Place the board and rubber switch membrane back into the bottom cover and ensure that the rubber switch membrane is seated properly prior to installing the top cover.

How do I change the battery in my power pole remote?

IMPORTANT: Make sure battery replacement is done in a dry location. STEP 1: Remove Key Fob Cover using a Flat-Tip screwdriver. FIG 1 STEP 2: Remove Switch Membrane and Circuit Board from the base FIG 2 STEP 3: Remove battery from holder and replace with a CR2032 3v Lithium Coin Battery. STEP 4: Reassemble Key Fob.

How do you manually raise a Power-Pole?

STANDARD MODE To raise or lower your Power-Pole, press and hold either the UP or DOWN button on the Dash Switch. The anchor will only continue to move as long as you press the button.

How long is Power-Pole warranty?

Warranty – Power-Pole offers a 5-year warranty on Blade and Pro II models, and 3 years on the Sportsman II vs 5 years on all models. Repair – Power-Pole anchors can be repaired at any of our over 1500 nationwide dealer network facilities including over 300 Certified Warranty Centers vs. regional repair centers.

Where is power pole serial number?

The serial number is located on the bottom of the unit housing next to where the electrical cables connect to the main unit.

How deep can a Power-Pole go?

10ft deep
Depth – Power-Pole has a maximum deployment of 10ft deep for the most effective stopping and holding vs. 12ft.

Is there a remote control for a power pole?

Experience complete control from anywhere on your boat with the Standard 2-Button Key Fob Remote with C-Monster 1.0 (CM1) technology. This waterproof controller features double-click for Auto Up/Down functions and comes with a floating Power-Pole lanyard. Wireless Dash Switch for Power-Pole – No More Wires!

How big can a Micro Power Pole hold?

Power-Pole Micro Spike Driver can hold Jon boats and small skiffs up to 1,500 lbs (including passengers) and is perfect for kayaks and paddle boards. Micro anchor unit is easily-removable making storage or transfer to other vessels simple.

What kind of Screws do I need to install a wireless power pole?

Features 3 speed settings, double click Auto Up/Down, independent control of multiple anchors and two-way communication with the HPU. It can be installed using the included 3M® waterproof adhesive or stainless steel screws.