What is a NanoStation M5?

What is a NanoStation M5?

The Ubiquiti NanoStation M5 (NSM5) is a high performance, low cost and extremely versatile Point-to-Point wireless bridge. The NSM5 comes with a redesigned, sleek and elegant form-factor, along with integrated Ubiquiti airMax (MIMO TDMA Protocol) technology. Ubiquiti NanoStation M5 Key Features: Great Performance.

What does a NanoStation AC Loco do?

The NanoStation AC and NanoStation AC loco both integrate a separate Wi-Fi radio for fast and easy setup using your mobile device. The UNMS™ app provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store® (iOS) or Google Play™ (Android).

What are nano stations?

2) “Station” is the unit that connects wirelessly to the Access Point and provides network service to the remote location. Features: 1) They are easy to install as long as you have a shielded CAT 5 cable going from your router location to the location of the NanoStation M5.

How do you connect NanoStation?

Make sure the Nanostation 2 (Nano for short) is connected to your computer’s network card with network cables, via the power injector (supplied with 12V either from the included wall-wart or another 12VDC source). There should then be at least one LED lit on the back of the Nanostation.

How does a Nanostation work?

We install a wireless device (either a Ubiquiti Nanostation M5 or Ubiquiti Nanostation Loco M5 depending on location) on the outside of your premises which then points to our network of repeater stations. This then passes the signal back to our core router, which then passes it to the internet.

How do I connect my router to NanoStation?

Using Ethernet cables, connect the following:

1. Connect the LRS gateway to the “Secondary” port on the router.
2. Connect the “Main” port on the router to the “POE” port on the power adapter.
3. Connect the “LAN” port on the power adapter to your internet source (optional)

How do I reset my NanoStation AC Loco?

Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the NanoStation loco is powered on.

How does a NanoStation work?

What is the IP address of The Nanostation M5 router?

Ip Address: 192.168.1.20. Login: ubnt. Password: ubnt. Login to the router with the default IP addresse 192.168.1.20 and then use the username / password: ubnt / ubnt.

How big is the Ubiquiti Nanostation nsm5 in inches?

NSM5 14.1 ounces 1.2 x 11.5 x 3.2 inches 1.2 x 11.5 x 3.2 inches White 8 24 Volts Network Hardware Ubiquiti Networks B00HXT8KJ4 No May 19, 2017

What kind of applications can a nanostationm be used for?

Featuring a panel antenna and dual-polarity performance, the NanoStation®M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor. Products are typically restocked within two weeks. Max.

How does a Nanostation station work on a router?

2) “Station” is the unit that connects wirelessly to the Access Point and provides network service to the remote location. 1) They are easy to install as long as you have a shielded CAT 5 cable going from your router location to the location of the NanoStation M5.