How do you use a Bluetooth module HC-06 with Arduino?

How do you use a Bluetooth module HC-06 with Arduino?

Once the module is configured as you wish, you can pair the module HC-06 to the device of your choice like any Bluetooth device. Select the name of your module in the list of available Bluetooth device (default is HC-06) and enter the PIN code (default is 1234). When it is done, The LED should stop blinking.

How do I use a Bluetooth module with Arduino?

Open Arduino IDE and go to Tools, then Serial Monitor. Set the Baud rate to 9600 and the ‘line ending’ to ‘Both NL and CR’. Type in ‘AT’ without the quotes and click send. If the Serial Monitor displays “OK”, the module is in AT mode and you are good to go.

How do I use my HC 05 Bluetooth module with Arduino?

In order to communicate with HC05 using Bluetooth, you need a Bluetooth terminal application on your phone. You can use this one. Now for start transferring data, upload this code on your Arduino and connect HC05 using the app you have just installed.

What is the difference between HC 05 and HC-06?

It can be either HC05 or HC06. Both the modules are same in functionality except the pinout. Also HC05 can act as both master and slave whereas HC06 functions only as slave.

What is the difference between HC-05 and HC-06?

Can HC-06 send data?

HC-06 works on serial communication. The Android app is designed to send serial data to the Arduino Bluetooth module when a button is pressed on the app. The Arduino Bluetooth module at other end receives the data and sends it to the Arduino through the TX pin of the Bluetooth module(connected to RX pin of Arduino).

What is the difference between HC 05 and HC 06?

What is the difference between HC-05 and HC 06?

Can Arduino connect to Bluetooth?

You can connect the Bluetooth module to the Arduino using a set of jumper wires and a connector. Note: Don’t connect RX to RX and TX to TX on the Bluetooth and Arduino. You will receive no data.