How do I use my Canon Speedlite 270ex 2?

How do I use my Canon Speedlite 270ex 2?


  1. Press the camera Menu button.
  2. Select the first Shooting Menu (first camera icon on the left).
  3. Select [Flash control] or [External Speedlite control].
  4. Select [External flash func. setting].
  5. Set [Flash mode] to [E-TTL II] This step is not necessary for cameras that have no built-in flash.

What is fill flash technique?

Fill flash is a technique photographers use to brighten deep shadowed areas, especially on gray days or extremely sunny sessions. As the term suggests, fill flash adds light to deep shadows cast harsh lighting. You can use fill light whenever the background is brighter than the main subject of the photo.

What is E TTL II?

E-TTL was originally introduced in 1995, then updated in 2004 to E-TTL II, which is the current system. The flash system shares the light sensors in the camera’s viewfinder which are also used for evaluative metering of the ambient light. As the shutter button is pressed, an ambient light reading is taken.

What kind of Flash does a canon 270EX use?

The Canon 270EX II flash is Canon’s current small flash. It’s small, light and works well if you don’t mind a slightly long recycle time, but I prefer my older Canon 220EX because it recycles twice as fast, has a real infra-red AF illuminator and even has a little more measured power, for half the price used if you know How to Win at eBay.

Which is better the canon 270EX II or the 430EX II?

The Canon 430EX II is much larger, with more power, almost instantaneous recycling and side-to-side bounce. If you want to carry more weight, the 430EX II is a much better flash. Canon 270EX II.

How big is the canon 270EX II zoom head?

Canon 270EX II (7.2 oz./203g with 2-AA eneloop cells, 4.3 second measured recycle time, ISO 100 measured guide number 17 meters/56 feet at 28mm setting, 28mm/50mm zoom head, about $164 new or about $120 used if you know How to Win at eBay ).

How do you put a flash on a Canon camera?

Step 1: Mount the flash on the camera and turn on the power Insert the external flash into the hot shoe on top of the camera. Once fully inserted, slide the mounting foot lock lever to lock it into place. Switch on the power supply of the camera, followed by that of the flash.