What are Racor filters?

What are Racor filters?

The Racor Fuel Filter Water Separator Turbine Series is a three-stage filtration system that provides maximum protection of diesel engine components by effectively removing contaminants from fuel, such as water, silica, sand, dirt, and rust.

Which Racor filter do I need?

Racor recommends that a 2-micron filter only be used in final or secondary filters where the fuel is first filtered by a primary filter. Further, the company says a 30-micron filter should be used as a primary to filter raw or poor-quality fuel before it is further filtered by finer media, such as a 10- or 2-micron.

Who makes racor?

Parker Hannifin Corporation
Racor, a Division of Parker Hannifin Corporation, is the global leader in fuel, air, oil, and coolant filtration systems for internal combustion engines and fuel delivery applications.

Where are Racor filters made?

Modesto
1996 In addition to the world class manufacturing facility in Modesto, Racor opens locations in Oklahoma, South Carolina, Brazil, Korea and South Africa.

How do you empty a Racor filter?

Don’t shutoff the fuel intake to avoid getting air in the lines and allow for easier flow. Get a glass jar and place it under the bottom drain and open the valve. Water and muck will come out first and when you see clear fuel starting to come out shut the valve. Just clean up any spilage and you are done.

How do Racor filters work?

The filter element fits onto a tube and the tube provides suction, drawing the fuel through the outside of the element into the center. This tube then draws the diesel down again, allowing it to exit directly opposite from the entry port. as a check valve to keep water from going up into the filter element.

Which is smaller 10 micron or 30 micron?

Filters with a larger micron rating allow larger particles through the system. Usually, a 10-micron filter is used for unleaded gasoline, and a 30-micron filter is used for diesel fuel. A 30-micron filter used in an unleaded dispenser unit can allow unwanted particles to pass through to the customer’s vehicle.

What is racor?

How often should you change Racor filters?

How do you know when it’s time to change a Racor fuel filter? As a guideline, change a fuel filter element every 500 hours, 10,000 miles, every other oil change, annually, or at first indication of power loss, whichever occurs first.