How do I reset my EDF smart meter?
How do I reset my in-home display? You can reset your in-home display if you have connection issues, or if it stops updating. Unplug it from the mains and hold down the power button on the back for five seconds. Wait one minute, reconnect to power and switch it on.
How do I pair my EDF smart meter?
It usually takes about three hours. Press and hold the power button on the back of your smart meter display to turn it on. To turn it off, press and hold the same button for five seconds. Each time you turn the smart meter display on, it will show ‘Welcome to IHD2’ then ‘Attempting to pair’.
What are the buttons on my smart meter?
Your meter may also have two buttons, one labeled ‘Reconnect’ and one labeled ‘Display Select. If your meter has an ‘A’ and ‘B’ button, press ‘A’ until you get to TOTAL ACT IMPORT. The number below this is your electricity reading. Your meter might have three buttons to the side of the display.
How do I read new messages on my smart meter?
On the Messages screen you’ll be able to see any messages that we’ve sent you. Just click view, and you’ll be able to read the message. When you have a new message to read, you’ll get an alert which will appear in the right corner of the screen. This will appear on the menu screen too.
How do I reconnect my smart meter?
To restore the lost connection to your smart meter, you’ll need to:
- Take your In-Home Display to where your electricity meter is located.
- Once you’re close to the meter, hold down the “OK button” until the In-Home Display turns off and then on again.
- You should then see the message: “your smart meter is now paired”.
Why is my British Gas smart meter not connecting?
If your smart energy monitor stops working check your power cable is inserted correctly and that your power supply is switched on at the wall. If it’s still not working, try using batteries. If batteries fix the issue, then the problem is with the cable.
What does the B button do on a smart meter?
press the white B button – the screen will light up. wait until the screen says ‘meter boost’ – press ‘A’ to select ‘no’ and you should see numbers followed by ‘KWH’ write down the numbers from left to right. ignore any zeroes at the beginning and any numbers after the decimal point.
What a smart meter looks like?
What does a smart meter look like? Every smart meter comes with an In-Home Display (or IHD), which is a screen that connects to your new smart meters and your Wi-Fi at home. This screen receives energy data from your meter and shows how much energy you’re using, as you use it.
How do I reconnect my British Gas smart meter?
Unplug your smart energy monitor. Move it closer to your electricity meter. Plug your smart energy monitor back in. Wait seven days (most smart energy monitors re-start automatically within a week)
How do you read a smart meter with A and B buttons?
If your meter has A and B buttons under the screen
- press the A button.
- press the A button again until you see ‘METER INDEX’ and numbers followed by ‘M3’
- write down the number from left to right.
- ignore any zeroes at the beginning and any numbers after the decimal point.
Can a smart meter be used for EDF?
You can switch to EDF if you already have a smart meter. If you have a newer smart meter, called SMETS2, we should be able to take your meter readings automatically. We’re gradually updating SMETS1 meters, so they’ll have the same functionality as SMETS2 smart meters.
Is it possible to switch from EDF to smets2?
You can switch to EDF if you already have a smart meter. If you have a newer smart meter, called SMETS2, we should be able to take your meter readings automatically. We’re gradually updating SMETS1 meters, so they’ll have the same functionality as SMETS2 smart meters. Log into MyAccount to book your installation appointment.
Do you have to have a smart meter to read your meter?
Find out how to read your smart meter and understand the meter readings. You have a credit smart meter if you pay for your energy after you’ve used it. Do you have an older in-home display that you can’t see here?
Why is my Geo duet smart meter not connecting?
View the Geo Duet Pay As You Go in-home display user guide (PDF 2.1MB). Why is my smart meter not connecting? Move the display closer to the meter if you have a weak signal, or you see the ‘connecting to smart meter’ message. The more bars you can see in the top left of the screen, the stronger the connection to your smart meter.