How do I reset my Whirlpool Duet dryer F01?
The Whirlpool Duet Dryer F01 error may be able to be fixed with a simple reset of the main control. Unplug the dryer for 1 minute and plug it back in this will reset the control if the error persists after that you will need to check the dryer thermal fuse.
What does F01 mean on my Whirlpool dryer?
The F01 error code means the primary control unit in the dryer has failed and will have to be replaced. The control that needs replacing is the electronic control board not the user interface and/or control panel.
What does F1 mean on a front load dryer?
The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.
Do Whirlpool dryers have a reset button?
Whirlpool dryers can do many things, such as monitor moisture levels and temperature, reduce noise, periodically tumble clothes to remove wrinkles, steam clothes and adjust the overall drying time according to fabric and load size. However, one thing a Whirlpool dryer cannot do is reset itself by pushing a button.
How do I reset my Whirlpool front load dryer?
If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.
What does F01 code mean on Whirlpool electric dryer?
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. How do you run a diagnostic on a Whirlpool Duet dryer?
What does F01 mean on dryer display?
F01 means that your main relay control board for the dryer has an internal short inside itself. If you pull the dryer forward and remove the screws coming in from the back of the top panel, the top panel will pull straight back, up, and off.
What does Maytag dryer code F01 mean?
Maytag dryer error code f01. This error code indicates a serious problem, which is not a DIY one at all. It means that the main relay control board is down and, most likely, needs to be replaced. It will take a bit of research, because you will need the full model number. It is printed on a sticker inside the door way.
What does Whirlpool Cabrio F1 error code mean?
Whirlpool Cabrio Washer Error F1. The Cabrio Washer F1 error code happens when the main control board gets a bad signal from the water level pressure switch circuit. This is normally caused by a pinched or ripped water level pressure switch hose. Steps to take to try and remedy this error are listed below.